Using the menus (Continued)
■The default setting menu
This menu shows placement status and other settings.
Item |
| Description |
|
|
Projection | Sets projection mode in accordance with Placement Style. p.21 | |||
mode | (Standard) | (Rear) | (Ceiling) | (Rear ceiling) |
No signal Set the time to wait for the power to be turned off after the last
power off operation is made with no input signal.
Off (not turned off) 
30 min.
|
| Auto input | Set whether the input with signals is only selected or not. |
| ||||||||
|
| search |
|
|
|
|
|
|
|
| On | Off |
|
|
|
|
| ||||||||
|
| Power on | Sets whether to turn on the power when the ON/STANDBY button is pressed |
| ||||||||
|
|
| (Manual), or when the power cord is plugged in (Auto). | Manual | Auto | |||||||
|
|
|
|
|
|
|
|
| ||||
|
| Lamp power | Sets the lamp power. |
|
|
| Low | Standard | ||||
|
|
|
|
|
|
|
| |||||
|
| Fan mode | Sets the cooling fan speed. |
|
| Standard | High | |||||
|
|
|
| |||||||||
|
| Remote control | When two or more projectors are used and controlled by the remote | |||||||||
|
|
| control respectively, this menu sets the code for the projector and the | |||||||||
|
|
| remote control. |
|
|
|
|
|
|
| ||
|
|
| [ | or | : Enter setting mode] | [ | : Select item] | [ | : | |||
|
|
| Select from 1, 2, 3, 4] | [ :Confirm] | [ | :Select OK to end] | ||||||
|
|
| Press [Cancel] to return. |
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
| ||||
|
| Key lock | Lock the control panel buttons. |
|
|
|
|
| ||||
|
|
| [ | or | : Enter setting mode] | [ | : Select item] | [ | : | |||
|
|
| Select On/Off] | [ | :Confirm] | [ | :Select OK to end] |
| ||||
|
|
| Press [Cancel] to return. |
|
|
|
|
| ||||
|
|
|
|
|
|
| ||||||
|
| Reset all | Press | . (The password and user logo are not reset.) |
|
| ||||||
|
|
|
| |||||||||
|
|
| Resets all adjustments and settings to their factory settings. | Yes | No | |||||||
|
|
|
|
|
|
|
|
|
| |||
|
| Password | Password function p.32 |
|
|
|
| Off | On | |||
|
|
| When [Password] is [On], the Password Setting screen is displayed. |
| ||||||||
[Power on]
Note that if [Power on] is set to [Auto], then if the power is supplied when restored after a power outage, the projector will come on.
[Lamp power]
When [Lamp power] is set to [Low], the screen becomes a little darker, but the cooling fan noise gets quieter.
[Fan mode]
Setting [Fan mode] to [High] increases the cooling fan speed. (The cooling fan noise gets louder.) Set this option to use the projector, for example, at high altitude (over 1,500 meters above sea level).
• Do not set Fan mode to [High] when using the projector at a lower altitude.
[Remote control]
Sets a remote control code from 4 types. You can set each code respectively for up to 4 projectors. The factory setting is [1].
To switch codes, set the same code for the projector and the remote control. A remote control code is applied after the setting is done.
•You cannot operate the remote control if the codes of the projector and the remote control do not match.
Remote control code setting for remote control
Remove the battery cover and set the same remote control code switch as the projector. p.16
[Key lock]
Protect from operating errors by locking on the control panel buttons of the projector. (The remote control operations are available.)
Control panel operations are locked after the setting is done, and accordingly operation with the control panel buttons is disabled.
Operations
Detailed description [Auto input search]
[On]: Automatically searches the signals that can be projected, and switches input from the connected device that outputs the video signals each time the INPUT button is pressed. The input from the connected device that outputs no video signals is skipped.
[Off]: Displays the Input select menu.
Toggle with 
buttons and press 
button. (The input without signals can be
selected.)40
Input select menu
Input select
Computer 1
Y/PB/PR 1
Computer 2
Y/PB/PR 2
Video
/
shows whether signal is input or not.
•To release the key lock, set the [Key Lock] to [Off] using remote control. Pressing the [RETURN] button on the projector for 10 seconds also sets the [Key Lock] to [Off]. (In the latter case, the LAMP, TEMP, and FAN indicators light in orange for 3 seconds.)
41