[Aging Mode]
This mode can be used for operation check of CD section and tape deck section.
•If an error occurred:
The aging operation stops and display status.
•If no error occurs:
The aging operation continues repeatedly.
1. Operating method of Aging Mode
Turn on the main power and select “CD” of the function.
1)Set a disc in DISC1 tray. Select ALL DISC CONTINUE, and REPEAT OFF.
2)Load the tapes recording use into the decks A and B respectively.
3)Press three buttons x , ENTER , and DISC SKIP
4)Aging operations of CD and tape are started at the same time.
5)To exit the aging mode, perform [MC Cold Reset].
3. | Aging Mode in CD section |
|
1) | Display state |
|
• | No error occurs | Display |
AGING[*][*][*][*]
Note:
[*][*][*][*] : Number of aging operations
Error display
E ** s ## $$ %% |
|
|
| |||||||
1 2 3 4 5 |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| |||
1 ** |
| The error No. 00 indicates the newest error. As the error No. increases, it means the older error. | ||||||||
|
| When you want to retrieve the error history, press the | PLAY MODE |
| button in the case of mechanism error. | |||||
|
| Or press the |
| button in the case of NO DISC error. |
|
|
| |||
|
| REPEAT |
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
2 s |
| M: Mechanism error |
| D: No disc error | ||||||
|
|
|
|
|
|
|
|
| ||
3 ## |
| Don’t care |
| 01: FOCUS ERROR | ||||||
|
|
|
|
|
|
|
|
| 02: GFS ERROR | |
|
|
|
|
|
|
|
|
| 03: SETUP ERROR | |
|
|
|
|
|
|
|
|
| ||
4 $$ |
| High order digits only |
| 01: NO DISC judgment without chucking retry | ||||||
|
| D: Stopped during closing due to problems other than mechanism. |
| 02: NO DISC judgment after chucking retry | ||||||
|
| E: Stopped during opening due to problems other than mechanism. |
|
|
| |||||
|
| C: Stopped during chucking due to problems other than mechanism. |
|
|
| |||||
|
| F: Stopped during |
|
| ||||||
|
|
|
|
|
|
|
|
| ||
5 %% |
| Emergency related errors (High order digits only) |
| Status at the time of NO DISC judgment | ||||||
|
| 1: | Stopped during |
| (High order digits only) | |||||
|
| 2: | Stopped during |
| 1: | STOP | ||||
|
| 3: Time out by |
| 2: | SETUP | |||||
|
| 5: | Time out by |
| 3: | TOC READ | ||||
|
|
|
|
|
|
|
|
| 4: | ACCESS |
|
|
|
|
|
|
|
|
| 5: | PLAY BACK |
|
|
|
|
|
|
|
|
| 6: | PAUSE |
|
|
|
|
|
|
|
|
| 7: | MANUAL SEARCH (PLAY) |
|
|
|
|
|
|
|
|
| 8: | MANUAL SEARCH (PAUSE) |
|
|
|
|
|
|
|
|
|
|
|
•When the buttons x, ENTER and DISC 1 are pressed simultaneously, number of time of the mechanism error and the NO DISC error
can be checked. Display: EMC**EDC**
•When aging operation is complete, be sure to perform the MC Cold Reset to reset the error history.
15