Toshiba TDP-T95 manual Control terminal, Pin assignment, Interface format, Main Commands

Page 27

Specifications (Continued)

■CONTROL terminal

●Pin assignment

			Pin No.	Signal Name	Description
	7		1	RXD	Receiving data
8	6		2	CTS	Consent to send
			3	DSR	Data set ready
5		3	4	GND	Signal ground
5		3	5	RTS	Request to send
			5	RTS	Request to send
	4		6	N.C	No connection
2	1		7	TXD	Sending data
			8	GND	Signal ground

Mini DIN 8 pin connector

●Interface format

1

Communication method

RS-232C, 9600bps, No Parity, Data Length: 8 bits;

Stop Bit Length:

1 bit

2

Communication format

STX (02h)

Command (3Byte)

ETX (03h)

Only 1 command valid per communication.

3

Data format

For input commands, only ASCII-compliant all-uppercase

alphanumeric characters supported.

4

Replies

Acknowledge

ACK (06h)

CR (0Dh)

Data

... Normally ended

ACK (06h)

ESC (1Bh)

... Aborted

No acknowledge

NAK (15h)

If commands are to be sent consecutively, wait for the response from the projector before sending the next command.

● Main Commands

Item	Command
Power on	PON
Power off	POF
Icon display on	MO0
Icon display off	MO1
Auto setting (RGB input)	PAT
Status display on	DON
Status display off	DOF

Note

• Contact your dealer for control cable and other commands.

52

Image 27

Contents TDP-T95 Safety Precautions USA onlyTested To Comply With FCC Standards Important Safety Instructions Important Safety Instructions Save Original Packing Materials Power Supply Cord SelectionImportant Precautions Place and Manner of InstallationRemote Control Batteries Exemption ClausesOther Cautions and Informations Contents Names of each part on the main unit Checking the package contentsName Main Function Label locationsReplace the battery cover Loading dry-cell batteries Into the remote controlOperating the remote control Remove the battery cover Insert the dry-cell batteriesOperating a computer PlacementConnecting a computer Placement StylesBefore connection ConnectionTurning the power on and off Turning the power on Press the ON/STANDBY buttonPress the ON/STANDBY button again Basic operations Using handy features Correcting the keystone distortionResizing image Changing screen size Using handy featuresChanging picture mode Cutting off the picture and sound temporarily MuteSelect On and press the button Password functionRe-enter the same password for confirmation Password entry screen is displayedUsing the menus How to use the menusImage adjustment menu Using the menus Display setting menuDetailed description Screen size Background Blackboard modePrecaution Reset logoDefault setting menu Displaying Information Status display About lampLamp replacement Trouble indications Lens and main unit cleaningLens cleaning Main unit cleaningSeparately sold product Before calling service personnelSpecifications List of general specificationsList of supported signals Video, S-Video signals SpecificationsList of supported signals RGB signals List of supported signals Y/PB/PR signalsInterface format Main CommandsControl terminal Pin assignment

Related manuals

Manual 28 pages 54.84 Kb