Toshiba TRST-A10 owner manual Connecting the Power Cord and Interface Cable

Page 18

5. INSTALLATION PROCEDURE

EO1-13019 5.1 Connecting the Power Cord and Interface Cable

5.1 Connecting the Power Cord and Interface Cable

CAUTION!

1.Be sure to hold the connector when plugging in or unplugging the AC adapter cable.

2.Insert the AC adapter cable and the power cord firmly.

1)Turn the printer power OFF.

2)Insert the power cord into the AC inlet.

3)Connect and secure the interface cable to the interface connector in the correct orientation. Serial interface: Secure the connector with the screws.

USB interface: Securely insert the connector until a positive click is heard.

Parallel interface: Secure the connector with the locking tabs.

[Serial Interface Connector]

[USB Interface Connector]

[Parallel Interface Connector]

5-2

Image 18

Contents TRST-A10 Series CE Compliance for EU only Safety Summary Precautions Request Regarding MaintenanceTable of Contents Product Overview FeaturesAccessory IntroductionDescription SpecificationsPrinter Mm PaperOptions Option Model DescriptionReceipt Roll Appearance Front/Rear ViewLED and Feed Button Blue LED Blinking Fast Problem What to Do Where to Go Serial interface connector ConnectorsDC24V Socket connector USB interface connectorSET UP Procedure Requirements for OperationRS-232C cable pin configuration Strobe Setting up the Printer Installation Procedure Connecting the Power Cord and Interface Cable Installation Procedure Connecting the Drawer Drawer interface connector 6-pin modular connectorGround terminal 6-pin modular connector Loading the Receipt Roll Edge Self Test Print ExitRolling Ascii print test Receipt Print test Receipt 00000008 Duty check print test ReceiptCurrent Setting Form Print current settingGeneral Maintenance CleaningRemoving Jammed Paper Troubleshooting Problem Check PointSolution Waste Recycling information for users EO1-13019A

Related manuals

Manual 32 pages 63.1 Kb