Toshiba TRST-A10 owner manual Current Setting Form, Print current setting

Page 27

5. INSTALLATION PROCEDURE

EO1-13019 5.4 Self Test Print

Print current setting

This option let you print current setting on receipt.

Press the Paper Feed Button to start the test.

** START CURRENT SETTING PRINTING?

Return Main Menu	> Short Click
Start Printing	> Long Click

NOTE: Press the Paper Feed Button for at least one second to validate the selection.

* Current Setting Form *

Model number	: TRST-A10
Serial number	: 12345678901
Boot Firmware
Version	: V00.02
Revision	: 00
CRC	: DEEB
Flash Firmware
Version	: V00.06
Revision	: 00
CRC	: 6696
SBCS
Version	: V00.01
Revision	: 00

5-11

Image 27

Contents TRST-A10 Series CE Compliance for EU only Safety Summary Request Regarding Maintenance PrecautionsTable of Contents Introduction FeaturesAccessory Product OverviewMm Paper SpecificationsPrinter DescriptionOption Model Description OptionsReceipt Roll Appearance Front/Rear ViewLED and Feed Button Blue LED Blinking Fast Problem What to Do Where to Go USB interface connector ConnectorsDC24V Socket connector Serial interface connectorRequirements for Operation SET UP ProcedureRS-232C cable pin configuration Strobe Setting up the Printer Installation Procedure Connecting the Power Cord and Interface Cable Installation Procedure Connecting the Drawer Drawer interface connector 6-pin modular connectorGround terminal 6-pin modular connector Loading the Receipt Roll Edge Exit Self Test Print Rolling Ascii print test Receipt Print test Receipt Duty check print test Receipt 00000008Print current setting Current Setting FormCleaning General MaintenanceRemoving Jammed Paper Troubleshooting Problem Check PointSolution Waste Recycling information for users EO1-13019A

Related manuals

Manual 32 pages 63.1 Kb