Toshiba EM1-33043D, EM1-33043A, B-210 SERIES owner manual Installing the Printer

Page 24

4. INSTALLING THE PRINTER

EM1-33043D

4.1LOADING THE BATTERY

2)Load a fully charged battery into the printer.

NOTE: Remove the battery pack cover from the battery, and then load the battery in the correct orientation as indicated in the following figure.

Battery

Battery Pack

Cover

Fig. 4-2

3)Close the battery cover completely.

4)Turn on the printer and the status indicator will blink, then go off. The status indicator which does not light or stays lit indicates that the battery is uncharged.

4- 2

Image 24

Contents Series Declaration Conformity TOC TOC Introduction FCC Notice Safety Summary Safety Precautions ∙ Attention Do not solder the battery Introduction Introduction Precautions Applicable Model ∙ B-210 Series Model name description1 1 G H 1 1 G B Accessories Print Head CleanerBattery Media Guide Specifications Printer∗ Available only on the GH23 model Serial Interface RS-232C Radio Interface∗ GH11 model ∗∗ GH12 model IrDA Interface Media LabelReceipt paper Specifications Appearance FRONT/REAR ViewFront View Rear ViewOperation Panel Reprint StatusInstalling the Printer Loading the BatteryBattery Cover Installing the Printer Installing the Media Guide Unit mm Slot2nd 4th 5thLoading the Media ∙ Batch issue Loading the Media ∙ Strip issue Loading the Media Securing the Printer to Your Waist Issuing the Media Handy Printer TerminalHandy Terminal Turn on the printer Issuing the Media CARE/HANDLING of the Media Calcium CaCO3 and kaolin Al2O3, 2SiO2, 2H2O General Maintenance CleaningGeneral Maintenance Covers and Operation Panel Removing Jammed Media Troubleshooting Troubleshooting Page