Toshiba B-210 SERIES, EM1-33043D, EM1-33043A owner manual Removing Jammed Media

Page 41

9. GENERAL MAINTENANCE

EM1-33043D

9.3REMOVING JAMMED MEDIA

9.3REMOVING JAMMED MEDIA

1.Turn off the printer.

2.Open the media cover.

3.Remove the media roll from the printer.

4.Remove the jammed media. DO NOT USE any sharp implement or tool as these could damage the printer.

5.Clean the print head and platen, then remove any further dust or foreign substances.

9- 4

Image 41

Contents Series Declaration Conformity TOC TOC Introduction FCC Notice Safety Summary Safety Precautions ∙ Attention Do not solder the battery Introduction Introduction Precautions 1 1 G H 1 1 G B Applicable Model∙ B-210 Series Model name description Battery Media Guide AccessoriesPrint Head Cleaner ∗ Available only on the GH23 model SpecificationsPrinter ∗ GH11 model ∗∗ GH12 model Serial Interface RS-232CRadio Interface IrDA Interface Receipt paper MediaLabel Specifications FRONT/REAR View AppearanceFront View Rear ViewReprint Status Operation PanelBattery Cover Installing the PrinterLoading the Battery Installing the Printer Installing the Media Guide Slot Unit mm2nd 4th 5thLoading the Media ∙ Batch issue Loading the Media ∙ Strip issue Loading the Media Securing the Printer to Your Waist Handy Terminal Issuing the MediaHandy Printer Terminal Turn on the printer Issuing the Media CARE/HANDLING of the Media Calcium CaCO3 and kaolin Al2O3, 2SiO2, 2H2O Cleaning General MaintenanceGeneral Maintenance Covers and Operation Panel Removing Jammed Media Troubleshooting Troubleshooting Page