4. INSTALLING THE PRINTER |
4.2INSTALLING THE MEDIA GUIDE
4.2INSTALLING THE MEDIA GUIDE
NOTE: The media guide is not required for a 55 mm wide label roll.
1)Slide the media cover release catches and open the media cover.
WARNING!
A cutter is attached to the inside of the media cover. Care should be take not to injure your hand with the cutter when opening the cover.
2)Fit the media guide into a slot which corresponds to the width of media to be used. First insert portion 1 , then 2 until it snaps in position.
Media Guide
2
1
Fig.
4- 3