Toshiba TDP-P75 owner manual Specifications, Projector specifications

Page 42

English

Specifications

Projector specifications

All specifications are subject to change without notice.

General
Product name	DATA Projector
Model name	TDP-P75
Optical
Display system	1-CHIP DMD 1024 x 768 XGA
Lens F/Number	F=2.4 to 2.6, f= 18.6 to 22.7 mm
Lamp	200W lamp
Electrical
Power supply	AC100 ~ 240V, 3.5A, 50/60 Hz (Automatic)
Power consumption	280 W (Max)
Mechanical
Dimensions	238 mm (W) x 86.8 mm (H) x 180 mm (D)
Weight	4.2 lbs (1.9 Kg)
Input terminal
RGB/ YPBPR input	Mini D-sub 15-pin (female)
S-VIDEO	Mini DIN 4-pin port x 1
VIDEO	RCA x 1
Audio in	Mini stereo
USB	Mini type B (Service purpose only)
Output terminal
Monitor out	Mini D-sub 15-pin (female)
Audio out	Mini stereo (variable)
Output
Speaker	1 watt x 1
Environmental requirements
Operating altitude and	0~35°C for height: 0~2,500 feet
temperature	0~30°C for height: 0~2,500~3,000 feet
	0~30°C for height: 3,000~10,000 feet (Plase
	switch the High fan speed mode on.)
Operating relative	10% ~ 90% (without condensation)
humidity

42 Specifications

Image 42

Contents TDP-P75 Safety Precaution Model Name TDP-P75USA only Canada only Source of light Important Safety InstructionsPower sources HeatVentilation Power cord protectionCleaning Water and moistureDo not place the product vertically AccessoriesLightning storms Do not stack componentsSafety check Damage requiring serviceReplacement parts ServicingPower Supply Cord Selection Do not use the product in a closed installation stateFor long periods of time Important Precautions Save Original Packing MaterialsExemption Clauses Other Notes and Information CopyrightsRemote Control Batteries Notational Conventions Used in This ManualContents Troubleshooting Specifications Additional InformationRegulation statements Shipping contents OverviewRear side Projector exterior viewFront / Upper side Bottom sideControls and functions Control panelRemote control Remote Control Front RearName Main Function Operating the remote control Preparing and using the remote controlLoading dry-cell batteries into the remote control Remote controlSwitching operation modes Operating a computer using the remote control Connecting a computerOperating a computer Floor front Positioning your projectorChoosing a location II. Ceiling frontScreen As seen from above ConnectionProjection distance and size Min length =Connecting to a computer Connecting to a Component Video device480i 480p 576i 576p 720p 50/ 60 Hz 1080i 50/ 60 Hz Connecting Video and S-Video devices Video or Video devices Video cable or Audio cableOperation Start upAuto-adjusting the image Adjusting the imageAdjusting the height Fine-tuning the image size and clarityCorrecting keystone Switching input signalsAdjusting the volume For exampleShutdown Menu operation Functions available when receiving differentSignal types Menu systemUsing the menus Image adjustment and press 5 or 6 button to select KeystoneMenu. Refer to p.34 for more details Image adjustment menu Display setting menu Default setting menu Information menu Additional Information Cleaning the lensCleaning the projector case Care of the projectorAbout the lamp Replace the lamp when a sign appears on the screenWhen the lamp is broken Storing the projectorLamp warning message Replacing the lampDo not turn the power on with the lamp cover removed When the projector is in an abnormal state Indicator lightsWhen the projector is in a normal state State RemarkTroubleshooting Specifications Projector specificationsSupported signal format for Component-YPBPRInput DimensionsSignal timing Supported timing for PC inputSupported signals for Video and S-Video inputs EEC statement Regulation statementsFCC statement MIC statement