English Français Español Deutsch Italiano Português Svenska
Using the menus
You can call up
■How to use the menus
The menu shown below is for operation instructions purposes and might differ from the actual display.
1. Press the MENU button Display the Setting display menu
2. Select a Category
■The image adjustment menu
Use this menu to adjust image-related items.
Items that can be adjusted are marked with “Yes”, and those that cannot are marked with “No”.
|
|
|
|
| Video |
|
Item | Description | Computer Y/PB/PR | DVI | |||
Contrast | Adjust the image contrast. | Yes | Yes | Yes | Yes | |
| Lower | Higher |
|
|
|
|
|
|
|
|
|
| |
Brightness | Adjust the brightness of the image. | Yes | Yes | Yes | Yes | |
Select a category by using 
.
There are following four categories:
Image adjustment menu p.29
Display setting menu | p.30 |
Default setting menu | p.31 |
Status display menu | p.32 |
Displays the current adjustments and settings of selected category.
Item shown with gray cannot be adjusted with the current input source.
| Darker | Brighter |
|
|
|
|
Color | Adjust the color of the image. | No | Yes | Yes | No | |
| Lighter | Deeper |
|
|
|
|
|
|
|
|
|
| |
Tint *1 | Adjust the tint of the image color. | No | No | Yes | No | |
| Reddish | Greenish |
|
|
|
|
|
|
|
|
|
| |
Sharpness | Adjust the sharpness of the image. | No | Yes | Yes | No | |
| Softer | Sharper |
|
|
|
|
|
|
|
|
|
| |
Noise | Set the function to reduce screen noise. | No | Yes | Yes | No | |
reduction |
|
|
|
|
|
|
3. Adjustments & Settings
Press 
to open the menu.
Item
Adjustment/Setting Value
These marks signify the items can be adjusted/set
by using 
.
These marks signify the items can be selected from the list by using 
.
After an item is selected, apply it by pressing 
.
This mark signfy that there are options.
Press 
to display a list of options.
The figure shows displays given for operation instructions purposes. As the display may differ depending on the item, use the following pages as a reference.
5.End
Press the MENU
button
The menu disappears.
| On (Enable) | Off (Disable) |
|
|
|
| |||
Picture | Press | . Toggle the picture mode with | Yes | Yes | Yes | Yes | |||
mode | / . |
|
|
|
|
|
|
|
|
| Dynamic/Standard/Theater |
|
|
|
|
| |||
|
|
|
|
|
|
| |||
Adjust red of the image color. |
| Yes | Yes | Yes | Yes | ||||
| Less red | More red |
|
|
|
|
| ||
|
|
|
|
|
| ||||
Adjust green of the image color. | Yes | Yes | Yes | Yes | |||||
| Less green | More green |
|
|
|
| |||
|
|
|
|
|
|
| |||
Adjust blue of the image color. |
| Yes | Yes | Yes | Yes | ||||
| Less blue | More blue |
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
NTSC mode*1 | Set the black level with | / | button. | No | No | Yes | No | ||
| US: | NTSC (US) mode |
|
|
|
|
|
| |
| Japan: NTSC (JAPAN) mode |
|
|
|
|
| |||
*1: [Tint] and [NTSC mode] can be displayed and adjusted only when the video signal is set to [NTSC] and [NTSC4.43]. (NTSC mode is set to JAPAN when the language is set to Japanese. It is set to US for other languages.)
Operations
| 4. Back |
Note | Return button |
|
•Menu adjustments and settings are saved when the power is turned off via the ON/ STANDBY button. If the power cable is disconnected before this, or the power goes out, then the data will not be saved.
28 | 29 |