Toshiba TDP-T95 owner manual Using the menus, How to use the menus, Image adjustment menu

on the control panel (main unit side) and remote control.

Using the menus

You can call up on-screen menus, and conduct a number of adjustments and settings using the operation buttons p.16

■How to use the menus

The menu shown below is for operation instructions purposes and might differ from the actual display.

■The image adjustment menu

Use this menu to set or adjust image-related items. Items that can be set or adjusted are marked with “Yes”, and those that cannot are marked with “No”. (When an item is masked, it indicates that you cannot select for the current input.)

Item	Description	Computer	Y/PB/PR Video S-video
Contrast	Adjust the image contrast.	Yes	Yes	Yes Yes

1.Press the MENU button

2.Select a Category

Select a category by using .

There are following four categories:

Image adjustment menu p.35

Display setting menu	p.37
Default setting menu	p.40
Status display menu	p.42

Display the Setting display menu.

Displays the current adjustments and settings of selected category.

Item shown with gray cannot be adjusted with the current input source.

		Lower	Higher
Brightness	Adjust the brightness of the image.				Yes	Yes	Yes	Yes
		Darker	Brighter
Color	Adjust the color of the image.				No	Yes	Yes	Yes
		Lighter	Deeper
Sharpness	Adjust the sharpness of the image.				No	Yes	Yes	Yes
		Softer	Sharper
Noise	Set the function to reduce screen noise.				No	Yes	Yes	Yes
reduction*1	On (Enable)		Off (Disable)
Picture mode	Press	. Toggle the picture mode with		.	No	Yes	Yes	Yes
	1/2/3

3.Adjustments & Settings Press or to open the menu.

			Item
			Adjustment/Setting Value				These marks
							signify that
							there are setting
		These marks signify					screens. Press
							or	to
		the items can be		These marks			display a list of
		adjusted/set by using		signify that there			setting screens.
	.			are options.
				Press	or
				to display a list of
				options.
These marks signify the items can						* When no item is
						changed, press			.
be selected from the list by using
.
After an item is selected, apply it by				Toggle items with		.
pressing	.			Select items with		and press	.

Fix selection with .

•The figure shows displays given for operation instructions purposes. As the display may differ depending on the item, use the following pages as a reference.

•To return to previous item, press the RETURN button.

4. End Press the MENU button.

(The menu disappears 30 seconds after the last operation.)

		1/2/3/4/5					Yes	No	No	No
/	R-level	Adjust red of the image color.					Yes	Yes	Yes	Yes
/
		Less red			More red
	G-level	Adjust green of the image color.					Yes	Yes	Yes	Yes
		Less green			More green
	B-level	Adjust blue of the image color.					Yes	Yes	Yes	Yes
		Less blue			More blue
	NTSC mode*2	Set the black level with			.		No	No	Yes	Yes
		US		: NTSC (US) mode
		JAPAN		: NTSC (JAPAN) mode
	Auto setting	Automatically adjusts items such as the sampling					Yes	No	No	No
		phase depending on the type of input signal.
	Position	Press	then change mode using			and	Yes	No	No	No
		adjust with		.
		Phase					Yes	No	No	No
		Adjust to eliminate flicker.
		Frequency					Yes	No	No	No
		Adjust to eliminate periodic patterns and flickering
		when many fine vertical lines appear on the screen.
		H-position					Yes	No	No	No

Adjust the horizontal position of the image.

Operations

34 35