Label locations
Caution – use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Parts on the rear panel |
| ||
(1) (2) (3)(4) | (5) | (6)(7)(8) (9) (11) (12) (13) | ■ Removing the slot |
|
| (10) | cover |
|
| Press on the circle (“O”) while | |
|
|
| |
|
|
| sliding the cover in the |
|
|
| direction of the arrow. The |
|
|
| cover will come off. |
(14) (15) (16) (17)
Do not carry the projector by having the slot cover part.
CAUTION Doing so may cause that cover to come off, resulting in the projector malfunction, injury or damage.
| Name | : Main Function |
(1) | Infrared remote sensor | : Senses commands from the remote control. p.20 |
(2) | CONTROL terminal |
|
| LAN | : Connects a network cable. |
| RS232C : When operating the projector via a computer, connect | |
|
| this to the controlling computer’s |
(3) | COMPUTER (Y/PB/PR) 2 IN terminal | |
| RGB : Input analog RGB signal from a computer or other | |
|
| source, or a component video signal (Y/PB/PR) from |
|
| video equipment. |
| AUDIO : Input audio signals. | |
(4) | COMPUTER (Y/PB/PR) 1 IN terminal | |
| ||
|
| a component video signal (Y/PB/PR) from video |
|
| equipment. |
| AUDIO : Input audio signals. | |
(5) | MONITOR terminal | : Connect to a computer display, etc. |
(6) | AUDIO OUT terminal | : Outputs audio signals. |
(7) | COMPUTER (Y/PB/PR) 3 IN terminal | |
| BNC : Input G/B/R/HD/VD signal from a computer, or a | |
|
| component video signal (Y/PB/PR) from video |
|
| equipment. |
| AUDIO : Input audio signals. | |
(8) | CARD indicator | : Displays PC card’s status. p.23 |
(9) | UNMOUNT button | : Press before removing PC card. p.23 |
(10) RESET switch (inside depression) : Press if CARD indicator turns red. p.23 | ||
(11) Eject button | : Press to remove PC card. p.23 | |
(12) PC card slot | : Insert PC cards here. p.23 | |
(13) USB terminal | : Connects a commercial USB memory. p.21 | |
(14) CAMERA POWER terminal | : DC power supply terminal (+15 V). Reserved for future | |
|
| use. |
(15) VIDEO IN terminal |
|
VIDEO : Input video signals from video equipment. AUDIO (L/R) : Input audio signals from video equipment.
: Connect the supplied power cord here.
: AC power line ON (standby)/OFF.
Preparations
18 | 19 |