Toshiba TDP-TW300 Operating the projector, Unplug the USB memory from the computer, Profile

Page 37

Using the Wireless Utility (Continued)

4Unplug the USB memory from the computer.

To unplug the USB memory, follow the instructions in the user s manual supplied with the USB memory or the computer.

•Setting on the projector

4When the setting is complete, the connection is established. The projector name of the connected projector or the MAC address of the wireless LAN PC card is displayed.

This operation is allowed only when the Transmission mode is set to Ad hoc in the projector network settings.

1Turn the projector power on.

2Insert the supplied wireless LAN PC card to the PC card slot.

3Switch the input to Wireless/Card.

4Plug the USB memory into the projector.

A message appears, notifying that the projector settings have been changed.

5When the setting is complete, the connection is established. The projector name of the connected projector or the MAC address of the wireless LAN PC card is displayed.

Copying the computer settings to the projector

•Setting on the projector

●Profile

This feature allows the user to save the computer settings.

●Web browser

Where the computer and the projector are connected over wireless LAN, bring up the window of Projector Configuration Tool by pressing the Set browser button.

1Turn the projector power on.

2Insert the supplied wireless LAN PC card to the PC card slot.

3Switch the input to Wireless/Card.

4Plug the USB memory into the projector.

A message appears, notifying that the projector settings have been changed.

5Select Config free (USB) in Wireless Utility settings from the Wireless/ Card menu and press the button.

6When a confirmation window appears, click Yes then press the button.

The network settings are saved to the USB memory. When successfully saved, a message appears.

7Unplug the USB memory following the instruction in p.49 .

•Setting on the computer

1 Launch the Wireless Utility software application.

2Plug the USB memory into the computer.

3After a confirmation message appears, make settings.

Precautions

•If the page is not displayed correctly, re-select the projector.

•When the network settings are changed, the network connection is disconnected. If you wish to reconnect, set up the computer again.

Precaution

•The simple 1:1 connection, the USB memory connection and the profile setting may not work normally depending on the type of the wireless LAN PC card and the wireless LAN embedded computer. When such a case arises, use the Wireless Utility menu to make network settings manually.

■Operating the projector

This function can be used with any projector input.

Note, however, that this will not function with a memory PC card.

1Launch the Wireless Utility software application.

The Screen Image transmission mode window appears on the computer’s screen.

Operations

72

73

Page 36 Page 38
Image 37
Page 36 Page 38
Contents TDP-TW300 Safety Precautions Overloading Power Sources Power-Cord ProtectionCleaning HeatImportant Safety Instructions Save Original Packing Materials Place and Manner of InstallationMoisture Condensation Wireless LAN PC Card Important Precautions Avoid Volatile LiquidCopyrights DisposalContents Names of each part on the main unit Checking the package contentsNames of each part on the control panel and remote control LAN Label locations Parts on the rear panelLoading dry-cell batteries Into the remote control Preparing and using the remote controlOperating the remote control Connecting a computerPlacement Styles PlacementProjection Distance and Size As seen from aboveConnecting with AV equipment Connecting with computersConnection Before connectionTurning the power on and off Basic operations Easy setup Using handy featuresCorrecting the keystone distortion Changing picture mode Using handy featuresResizing image Changing screen sizeSplit function setting Sub screen settingDisplay a sub screen PIP function Displaying two screens Split functionIf you forgot the password, please inquire your dealer Password functionScreen combination of PIP and Split functions How to use the menus Using the menusImage adjustment menu Display setting menu Using the menusDetailed description Screen size Background Reset logoStart-up screen User logo BackgroundDefault setting menu Detailed description Wired LAN Control setting menuPJLink Character entryIf Card indicator turns red How to use the PC card slotDisplaying Information Status display Mounting a PC cardSetting up the wireless LAN How to use the USB terminalSetup using the Setting display Setting up the wireless LANProjector settings Be sure to read this subsection Details on individual items Setting Wireless UtilityComputer settings USB memories Memory PC cardsBacking up data Jpeg filesSetting slideshow options Plug a memory PC card Playing a slide show from a thumbnail listSearching for a target file Displaying slidesRotating a slide Checking the projector statusStatus display ApplicationUsing the Wireless Utility Installing the applicationsUsing the Wireless Utility Easy Connect utility Unplug the USB memory from the computer Operating the projectorProfile Web browserHow to use the Jpeg Conversion Tool Converting files created with Microsoft PowerPoint How to use the Jpeg Conversion ToolMaking a presentation with converted Jpeg files Select items from the menu on the left How to use the Projector Configuration ToolDetails on major items Lamp replacement Lamp replacementUnplug power cord Wait until lamp is sufficiently cooled About lampLens and main unit cleaning Trouble indications Before calling service personnelBefore calling service personnel SpecificationsList of general specifications Separately sold productList of supported signals RGB signals SpecificationsList of supported signals Y/PB/PR signals List of supported signals Video, S-Video signalsPin assignment of DVI-I terminal Control terminal Main CommandsPin assignment Interface format
Top Page Image Contents