Toshiba TDP-TW300 owner manual Computer settings

Page 29

Setting up the wireless LAN (Continued)

The higher the number of bits, the stronger the encryption, and hence the harder it will be for a third party to decipher your communications. However, setting higher encryp- tion levels may slow down communication speed. To set the highest security level, specify a 128-bitWEP key. For higher security, avoid using a word found in a dictionary and change the key sometimes.

Set the following item if you have set the communication mode to Infrastructure.

<DHCP>

If you set DHCP to Use, the IP address of the projector is assigned automatically by the DHCP server. If your network environment does not assign IP addresses automatically, set DHCP to Not use, then set the following items IP address, Subnet mask and Gateway manually.

<IP address>

When DHCP is set to Not use, consult with your network administrator for the settings below and set the IP address manually.

An IP address is a unique number assigned to a terminal for connection to the Internet. The format is a string of four dot-separated three-digit numbers. (Example: 111.112.xxx.xxx)

<Subnet mask>

A subnet mask is used to determine what subnet the IP address assigned to a terminal belongs to. (Example: 255.255.xxx.xxx)

<Gateway>

This value specifies the device, such as a router, to be used to access servers outside the network. It is identified by the IP address. (Example: 111.112.xxx.xxx)

•[Setting initialization]

This item resets the wireless LAN settings to their factory defaults.

•[Projector name]

This can be used to identify projectors when communicating with multiple projectors, or if there is a possibility that another person who is out of communication range will be using the same projector. It is recommended this is set to prevent wrong transmission.

Note

•XXXXXXTR-21-2.

•[WEB browser]

<Browser authentication>

Browser authentication and Password are factory-set to Off and no string, respectively. You should set them as soon as possible.

<Password>

If you have forgotten your password, set it again using the menu on the main unit.

■Computer settings

Refer to instruction manuals of your computer or wireless LAN PC card to perform the following settings.

•Select Ad hoc (for some PC cards, this is Peer-to-Peer Group).

•You may need to set channels depending on the wireless LAN PC card being used. Make the [Channel] settings identical to the computer settings.

•Set SSID (for some types of PC card, use Network name instead) as the same as projector’s SSID (at factory shipment, this is set to TDPJ).

•If Encryption and Key are set on the projector, set to the same values.

Note

•The Config Free utility allows users to easily connect the projector to a computer over wireless networks, without making network setting. For Config Free support, the computer requires a wireless LAN environment that is NDIS5.1 compliant.

Refer to the userís manual supplied with the wireless LAN adapter or the wireless LAN embedded computer for more information.

Operations

56

57

Page 28 Page 30
Image 29
Page 28 Page 30
Contents TDP-TW300 Safety Precautions Overloading Power Sources Power-Cord ProtectionCleaning HeatImportant Safety Instructions Moisture Condensation Place and Manner of InstallationSave Original Packing Materials Wireless LAN PC Card Important Precautions Avoid Volatile LiquidCopyrights DisposalContents Names of each part on the main unit Checking the package contentsNames of each part on the control panel and remote control LAN Label locations Parts on the rear panelLoading dry-cell batteries Into the remote control Preparing and using the remote controlOperating the remote control Connecting a computerPlacement Styles PlacementProjection Distance and Size As seen from aboveConnecting with AV equipment Connecting with computersConnection Before connectionTurning the power on and off Basic operations Correcting the keystone distortion Using handy featuresEasy setup Changing picture mode Using handy featuresResizing image Changing screen sizeSplit function setting Sub screen settingDisplay a sub screen PIP function Displaying two screens Split functionScreen combination of PIP and Split functions Password functionIf you forgot the password, please inquire your dealer Image adjustment menu Using the menusHow to use the menus Detailed description Screen size Using the menusDisplay setting menu Background Reset logoStart-up screen User logo BackgroundDefault setting menu Detailed description Wired LAN Control setting menuPJLink Character entryIf Card indicator turns red How to use the PC card slotDisplaying Information Status display Mounting a PC cardSetting up the wireless LAN How to use the USB terminalProjector settings Be sure to read this subsection Setting up the wireless LANSetup using the Setting display Details on individual items Setting Wireless UtilityComputer settings USB memories Memory PC cardsBacking up data Jpeg filesSetting slideshow options Plug a memory PC card Playing a slide show from a thumbnail listSearching for a target file Displaying slidesRotating a slide Checking the projector statusStatus display ApplicationUsing the Wireless Utility Installing the applicationsUsing the Wireless Utility Easy Connect utility Unplug the USB memory from the computer Operating the projectorProfile Web browserHow to use the Jpeg Conversion Tool Making a presentation with converted Jpeg files How to use the Jpeg Conversion ToolConverting files created with Microsoft PowerPoint Details on major items How to use the Projector Configuration ToolSelect items from the menu on the left Lamp replacement Lamp replacementUnplug power cord Wait until lamp is sufficiently cooled About lampLens and main unit cleaning Trouble indications Before calling service personnelBefore calling service personnel SpecificationsList of general specifications Separately sold productList of supported signals RGB signals SpecificationsList of supported signals Y/PB/PR signals List of supported signals Video, S-Video signalsPin assignment of DVI-I terminal Control terminal Main CommandsPin assignment Interface format
Top Page Image Contents