Toshiba TDP-TW300 owner manual How to use the USB terminal, Setting up the wireless LAN

Page 26

How to use the USB terminal

This projector can connect with a commercial USB memory and a USB memory card reader that are USB2.0 compliant, a digital camera or the like and display the JPEG files saved in those devices. p.59

(Toshiba does not guarantee the operation of all USB 2.0-compliant devices.) To connect or disconnect a USB device, use the following procedure:

■Connecting USB memory

q Remove the slot cover.

Slightly push the circled part and slide toward the arrow.

Slot cover

wPlug the USB memory.

Make sure the orientation is correct then plug the

 

USB memory in until it stays securely.

USB memory

■Disconnecting USB memory

qPress the MENU button twice to display the Wireless/Card menu then select and run Slideshow settings and Unplug device.

The processing for disconnecting a USB device starts.

wThe message “Safe to remove the USB device”. appears on the screen.

eUnplug the USB device.

Be sure to perform the above operations. Disconnecting a USB device during operation may cause a malfunction or data corruption.

Precautions

•The USB terminal does not support the supplied mouse remote control receiver or a commercial mouse controller.

•A USB hub is also not supported.

•Turning off the main power or disconnecting the power plug while the USB device is operating may cause a malfunction or data corruption.

Setting up the wireless LAN

■Functions

The following functions are available via wireless communications, when the wireless LAN PC card and dedicated Wireless Utility software p.66 included with this projector are used.

Note: A wireless LAN PC card except the supplied one (or recommended by Toshiba) does not work with this product. Please ask your dealer about the available wireless LAN PC card.

1)Displaying a computer’s screen via the projector

The computer’s desktop screen can be sent, as well as the screens of a variety of software applications, to the projector for display.

2)Displaying an image saved on a computer via the projector JPEG files can be sent to the projector for display.

3)Operating the projector by means of a computer

Some of the same functions available from the remote control can be performed.

■Communication mode

This projector supports both Ad hoc and Infrastructure Communication modes.

◆Ad hoc communication mode

This is transmission mode to communicate

between wireless LAN equipment.

Wireless communication can be performed via the

simple configurations. This function can only be used if the projector is in range of the computer’s wireless signals.

For security reason, confirm the specifications of your computer for the distance that the radio wave can reach. The coverage of this projector may vary, depending on the computer and the surrounding environment. When tested with a PC manufactured by Toshiba with built-in wireless LAN system, the coverage is approximately 60 m with an unobstructed path between the projector and computer placed indoors. This figure is not guaranteed and should be considered as merely a guideline.

◆Infrastructure communication mode

 

A mixed wireless and wired LAN can be created

 

To LAN,

via access points. Connecting to the rest of the

Internet, etc.

world via a wired LAN or the Internet generally

 

Hub

requires a high level of security.

 

Access point

Use the appropriate transmission mode for your network environment.

Operations

50

51

Page 25 Page 27
Image 26
Page 25 Page 27
Contents TDP-TW300 Safety Precautions Cleaning Power-Cord ProtectionOverloading Power Sources HeatImportant Safety Instructions Moisture Condensation Place and Manner of InstallationSave Original Packing Materials Copyrights Important Precautions Avoid Volatile LiquidWireless LAN PC Card DisposalContents Checking the package contents Names of each part on the main unitNames of each part on the control panel and remote control Label locations Parts on the rear panel LANOperating the remote control Preparing and using the remote controlLoading dry-cell batteries Into the remote control Connecting a computerProjection Distance and Size PlacementPlacement Styles As seen from aboveConnection Connecting with computersConnecting with AV equipment Before connectionTurning the power on and off Basic operations Correcting the keystone distortion Using handy featuresEasy setup Resizing image Using handy featuresChanging picture mode Changing screen sizeDisplay a sub screen PIP function Sub screen settingSplit function setting Displaying two screens Split functionScreen combination of PIP and Split functions Password functionIf you forgot the password, please inquire your dealer Image adjustment menu Using the menusHow to use the menus Detailed description Screen size Using the menusDisplay setting menu Start-up screen Reset logoBackground User logo BackgroundDefault setting menu PJLink Control setting menuDetailed description Wired LAN Character entryDisplaying Information Status display How to use the PC card slotIf Card indicator turns red Mounting a PC cardHow to use the USB terminal Setting up the wireless LANProjector settings Be sure to read this subsection Setting up the wireless LANSetup using the Setting display Setting Wireless Utility Details on individual itemsComputer settings Backing up data Memory PC cardsUSB memories Jpeg filesSetting slideshow options Searching for a target file Playing a slide show from a thumbnail listPlug a memory PC card Displaying slidesStatus display Checking the projector statusRotating a slide ApplicationInstalling the applications Using the Wireless UtilityUsing the Wireless Utility Easy Connect utility Profile Operating the projectorUnplug the USB memory from the computer Web browserHow to use the Jpeg Conversion Tool Making a presentation with converted Jpeg files How to use the Jpeg Conversion ToolConverting files created with Microsoft PowerPoint Details on major items How to use the Projector Configuration ToolSelect items from the menu on the left Unplug power cord Wait until lamp is sufficiently cooled Lamp replacementLamp replacement About lampLens and main unit cleaning Before calling service personnel Trouble indicationsList of general specifications SpecificationsBefore calling service personnel Separately sold productList of supported signals Y/PB/PR signals SpecificationsList of supported signals RGB signals List of supported signals Video, S-Video signalsPin assignment Main CommandsPin assignment of DVI-I terminal Control terminal Interface format
Top Page Image Contents