Toshiba TLP-XC2500, TLP-X2500 owner manual Connection, Placement Styles, Before connection

Page 12
a (max length) = projection size (inches) – 0.7525 28.266
a (min length) = projection size (inches) – 0.9164 33.998

Placement

Placement Styles

As shown in the figures below, this device can be placed in 4 different styles.

The factory setting is “floor-mounted front projection.” Set the [Projection mode] in the Default setting 2 menu, in accordance with your needs. p.43

Connection

Before connection

•

Read the owner’s manual of the device you are connecting to the projector.

• Some types of computer cannot be used or connected to this projector.

 

Check for an RGB output terminal, supported signal p.57 , etc.

Floor-mounted front projection

•

Turn off the power of both devices before connecting.

• The figure is a sample connection. This does not mean that all of these devices can or

 

must be connected simultaneously. (Dotted lines mean items can be exchanged.)

Computer

Video recorder,

Computer

Computer

(for control)

DVD player, etc.

 

 

 

 

 

Ceiling-mounted front projection

Ceiling-mounted rear projection

 

 

To audio output

 

 

White (L)/Red (R)

To

 

Audio cable

RS-232C

p.59

(not supplied)

 

 

terminal

Control cable

To S-video output

S-video cable (not supplied)

To audio output

Audio cable (not supplied)

To audio

output

To RGB

output Audio cable (not supplied)

RGB cable (supplied)

To RGB output

RGB cable (not supplied)

Preparations

WARNING

•Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit. Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus resulting in injury.

•If you wish to mount the projector on the ceiling, be sure to ask your dealer to do so. Mounting the projector on a ceiling requires special ceiling brackets (sold separately) and specialized knowledge. Improper mounting could cause the projector to fall, resulting in an accident.

•If the projector is ceiling-mounted, install the breaker for turning off the power in case of anomaly. Let everyone involved with the use of the projector know that fact.

Monitor

It is necessary to switch to MONITOR OUT by the switch.

Projection Distance and Size

Use the figures, tables, and formulas below to determine the projection size and projection distance. (Projection sizes are approximate values for full-size picture with no keystone adjustment.)

AV cable

(not supplied)

Audio cable (not supplied)

Audio cable (not supplied)

p.18

Monitor cable Mini D-sub 15P-BNC (not supplied)

To Y/CB/CR output Green (Y)/Blue (CB)/Red (CR)

Screen As seen from above

90°

To audio

 

output

To video

White (L)/

Red (R)

output

To audio input White (L)/Red (R)

To audio output

Conversion adapter BNC-pin (not supplied)

As seen from the side

Lens center

90°

H

a

a is the distance (m) between the lens and the screen, and corresponds to a range of 1.15 m to 8.80 m. H is the height from the image bottom to the center of the lens.

projection

projection distance a (m)

height (H)

size (cm)

min length

max length

(cm)

 

 

(zooming max)

(zooming min)

 

33 (84)

–

1.15

6.7

40

(102)

1.15

1.39

8.1

60

(152)

1.74

2.10

12.2

80

(203)

2.33

2.80

16.3

100

(254)

2.91

3.51

20.3

150

(381)

4.39

5.28

30.5

200

(508)

5.86

7.05

40.6

250

(635)

7.33

8.82

50.8

300

(762)

8.80

–

61.0

Video recorder, etc.

Audio amplifier, etc.

DVD video recorder, etc.

22

23

Page 11 Page 13
Image 12
Page 11 Page 13
Contents TLP-X2500 Safety Precautions USA onlyImportant Safety Instructions Important Safety Instructions Power Supply Cord Selection Important PrecautionsPlace and Manner of Installation Save Original Packing MaterialsRemote Control Batteries Exemption ClausesOther Cautions and Informations Contents Checking the package contents Names of each part on the main unitRemote Control TLP-X2500 Remote controlRemote Control TLP-XC2500 Control panelNames of the terminals on the rear panel CameraPreparing and using the remote control Loading dry-cell batteries into the remote controlOperating the remote control Connecting a computerPlacement Placement StylesConnection Before connectionTurning the power on and off Label locationsConnection Turning the power on and off Basic operationsUsing handy features Basic operationUsing handy features Changing picture modeResizing image Cutting off the picture and sound temporarily MuteSetting the password Changing screen sizeFreezing the image Freeze Select OFF Select OK and press the button Using the menus How to use the menusImage adjustment menu Using the menus Display setting menuDetailed description Screen size Blackboard mode PrecautionReset logo Up/down shiftDefault setting menu Default setting 1 menuDefault setting 2 menu Using the document camera Displaying Information Status displayPreparation of the document camera Key lockUsing the document camera Image projection with the document cameraWhen the lamp is broken About lampLocking the white balance Press W.BALANCE button and lock the white BalanceLamp replacement Air filter cleaning Lens and main unit cleaningBefore calling service personnel Trouble indicationsSpecifications List of general specificationsList of supported signals RGB signals SpecificationSpecifications List of supported signals Y/PB/PR signalsList of supported signals Video, S-Video signals Separately sold product

TLP-XC2500, TLP-X2500 specifications

The Toshiba TLP-X2500 and TLP-XC2500 projectors are designed to deliver high-quality images and versatile functionality for both professional and educational environments. These projectors are known for their advanced features, compact design, and easy operational capabilities, making them an excellent choice for a variety of applications.

One of the main features of the TLP-X2500 and TLP-XC2500 is their impressive brightness levels. With a high lumens output, these projectors ensure vibrant and clear images even in well-lit rooms. This capability is crucial for presentations, classrooms, and conference settings where ambient light cannot be controlled easily.

The resolution of these projectors is another notable characteristic. The TLP-X2500 offers XGA resolution, providing sharp and detailed visuals that enhance the viewing experience. The TLP-XC2500 takes it a step further with a higher resolution capability, making it suitable for detailed graphic presentations and multimedia usage.

Both projectors incorporate advanced image technologies, including Enhanced Color Management and BrilliantColor technology. These features contribute to accurate color reproduction, allowing for vivid and realistic images. The projectors also support a range of aspect ratios, accommodating different content formats and viewing preferences.

Interconnectivity is a strong point of the TLP-X2500 and TLP-XC2500. The models offer multiple input options, including HDMI, VGA, and composite, enabling users to connect various devices with ease. This versatility makes the projectors ideal for use with laptops, DVD players, and other multimedia devices.

Portable and lightweight, the TLP-X2500 and TLP-XC2500 are designed for mobility. They come equipped with a user-friendly interface, allowing for quick setup and operation. These features make them suitable for on-the-go presentations and dynamic learning environments.

Furthermore, Toshiba emphasizes energy efficiency in these models. The projectors are engineered to reduce power consumption while maintaining performance, contributing to lower operational costs and a reduced environmental footprint.

In summary, the Toshiba TLP-X2500 and TLP-XC2500 projectors stand out for their brightness, resolution, color accuracy, and connectivity options. Their design and energy-saving features position them as valuable tools for enhancing presentations and educational experiences across various settings. With reliable performance and extensive capabilities, these projectors are well-suited for anyone looking to make a lasting impression.
Top Page Image Contents