Toshiba TLP-XC2500, TLP-X2500 owner manual Basic operations, Turning the power on and off

Page 14

Turning the power on and off (Continued)

Notes

•The start-up screen will disappear after a moment. You can dismiss the start-up screen before this by performing any operation. You can also configure the start-up screen not to appear via the Display setting menu p.39 .

•The first time you use the projector after purchase, after the start-up screen disappears, the start menu is displayed p.27 .

•Beep sound can be set not to beep in the Default setting 1 menu p.42 .

•When [Key lock] is [On], the operation buttons of the projector do not work p.43 .

•When [Password setting] is [On], then the start-up screen is displayed after the Password entry screen disappears p.33 .

Basic operations

1Turn on the power.

Turn on the power by following the instructions in “Turning the power on” p.25 .

2Select the language and the lamp power (When using the first time).

When the projector is used for the first time after purchase, the start menu for lan- guage (to display the menus and messages on the screen) and lamp power selection and configuration is displayed in English. (If the screen is out of focus, adjust it according to the step 6 .)

■ Turning the power off

1 Press the ON/STANDBY button.

A message appears on the screen, confirming that you wish to shut off the power. This message will disappear after a moment. (This operation is no longer valid after the message disappears.)

2Press the ON/STANDBY button once again.

When the setting of beep sound is [On], the projector beeps, and the screen turns off, but the internal cooling fan continues to operate. Then, the projector goes into standby mode.

qUse theorbutton to select the desired language and press thebutton.

Message for setup confirmation is displayed in a selected language.

Then, the menu for lamp power selection and configuration is displayed. It is automatically set as Standard. To change the setting, follow the step w.

wUse theor button to select the lamp power and press the button.

The lamp power, if selected, will be toggled without pressing the button. The display automatically disappears in a few seconds.

English

French

German

Italian

Spanish

Portuguese

Russian

Swedish

Turkish

Polish

Japanese

Chinese (simplified)

Chinese (traditional)

Korean

During cooling, the ON/STANDBY indicator flashes. While the indicator is flashing, the power can not be turned back on. At this point of time, it does not matter even if you unplug the power cord.

Note

•The projector consumes about 10W of power in standby. We recommend that you unplug the power cord if you will not be using the projector for an extended period.

PRECAUTION

•If you turn the power on before cooling is complete, give the lamp time (about 5 minutes) to cool before plugging it back in. If the lamp overheats, it may fail to light.

LCD Panels

LCD panels wear out. In order to prolong the lifetime of your LCD panel, take the following precautions.

•In order to extend the lifetime of the LCD panel, always turn off the power when not in use, and make sure that the lamp is off. Keeping the lamp off is also very effective at saving electricity.

•If the air filter becomes dirty and clogged, the projector’s internal temperature will rise, shortening the lifetime of the LCD panel and causing malfunctions. Clean the air filter from time to time p.52 , and replace it periodically. Contact the store where you purchased your projector, or your local Service Station for replacement air filters.

Notes

•When the projector is turned on the next time, the start menu does not appear upon startup. However, if [Reset all] is executed from the Default setting 2 menu p.43 , the start menu will be displayed the next time when the power is turned on.

•The language can also be set via the Display setting menu p.39 and Lamp power via the Default setting 1 menu p.42 .

•This owner’s manual assumes that English has been selected.

3Activate the connected device.

Turn on and start the connected device such as a computer.

4Press the INPUT button.

An image of the connected equipment is projected.

Each time you press the INPUT button, it switches to the input of the connected equipment that is outputting video signals.

Notes

•When [Auto input search] is set to [Off] in the Default setting 1 menu p.42 (factory setting is [On]), the Input select menu appears if you press the INPUT button.

•If no signal is being output from the connected equipment, pressing the INPUT button does not change the input and “There is no other input signal.” will appear.

Operations

26

27

Page 13 Page 15
Image 14
Page 13 Page 15
Contents TLP-X2500 Safety Precautions USA onlyImportant Safety Instructions Important Safety Instructions Place and Manner of Installation Power Supply Cord SelectionImportant Precautions Save Original Packing MaterialsOther Cautions and Informations Remote Control BatteriesExemption Clauses Contents Checking the package contents Names of each part on the main unitRemote Control TLP-XC2500 Remote Control TLP-X2500Remote control Control panelNames of the terminals on the rear panel CameraOperating the remote control Preparing and using the remote controlLoading dry-cell batteries into the remote control Connecting a computerConnection PlacementPlacement Styles Before connectionConnection Turning the power on and offLabel locations Turning the power on and off Basic operationsUsing handy features Basic operationResizing image Using handy featuresChanging picture mode Cutting off the picture and sound temporarily MuteFreezing the image Freeze Setting the passwordChanging screen size Select OFF Select OK and press the button Image adjustment menu Using the menusHow to use the menus Detailed description Screen size Using the menusDisplay setting menu Reset logo Blackboard modePrecaution Up/down shiftDefault setting 2 menu Default setting menuDefault setting 1 menu Preparation of the document camera Using the document cameraDisplaying Information Status display Key lockUsing the document camera Image projection with the document cameraLocking the white balance When the lamp is brokenAbout lamp Press W.BALANCE button and lock the white BalanceLamp replacement Air filter cleaning Lens and main unit cleaningBefore calling service personnel Trouble indicationsList of supported signals RGB signals SpecificationsList of general specifications SpecificationList of supported signals Video, S-Video signals SpecificationsList of supported signals Y/PB/PR signals Separately sold product

TLP-XC2500, TLP-X2500 specifications

The Toshiba TLP-X2500 and TLP-XC2500 projectors are designed to deliver high-quality images and versatile functionality for both professional and educational environments. These projectors are known for their advanced features, compact design, and easy operational capabilities, making them an excellent choice for a variety of applications.

One of the main features of the TLP-X2500 and TLP-XC2500 is their impressive brightness levels. With a high lumens output, these projectors ensure vibrant and clear images even in well-lit rooms. This capability is crucial for presentations, classrooms, and conference settings where ambient light cannot be controlled easily.

The resolution of these projectors is another notable characteristic. The TLP-X2500 offers XGA resolution, providing sharp and detailed visuals that enhance the viewing experience. The TLP-XC2500 takes it a step further with a higher resolution capability, making it suitable for detailed graphic presentations and multimedia usage.

Both projectors incorporate advanced image technologies, including Enhanced Color Management and BrilliantColor technology. These features contribute to accurate color reproduction, allowing for vivid and realistic images. The projectors also support a range of aspect ratios, accommodating different content formats and viewing preferences.

Interconnectivity is a strong point of the TLP-X2500 and TLP-XC2500. The models offer multiple input options, including HDMI, VGA, and composite, enabling users to connect various devices with ease. This versatility makes the projectors ideal for use with laptops, DVD players, and other multimedia devices.

Portable and lightweight, the TLP-X2500 and TLP-XC2500 are designed for mobility. They come equipped with a user-friendly interface, allowing for quick setup and operation. These features make them suitable for on-the-go presentations and dynamic learning environments.

Furthermore, Toshiba emphasizes energy efficiency in these models. The projectors are engineered to reduce power consumption while maintaining performance, contributing to lower operational costs and a reduced environmental footprint.

In summary, the Toshiba TLP-X2500 and TLP-XC2500 projectors stand out for their brightness, resolution, color accuracy, and connectivity options. Their design and energy-saving features position them as valuable tools for enhancing presentations and educational experiences across various settings. With reliable performance and extensive capabilities, these projectors are well-suited for anyone looking to make a lasting impression.
Top Page Image Contents