Toshiba TLP-XC2500, TLP-X2500 owner manual Lamp replacement

Page 26

Lamp replacement

A lamp is consumable supplies. If used for extended periods, images will appear dark, and the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The lifetime of the lamp depends on condition of use.) If this happens, replace it with a new one.

WARNING

•If the projector is mounted on the ceiling, it is recommended to use your Toshiba dealer- ship when the lamp has to be exchanged.

Uncovering the lamp while the projector is mounted on a ceiling may lead to a danger of damage from falling pieces of glass if the lamp is broken. Besides, working at high elevations can also be hazardous. Do not attempt to replace the lamp by yourself.

•When replacement is required, be sure to use TLPLW11 (sold separately).

5 Mount the new lamp.

5

Align the orientation, press down the new lamp until the bottom is reached, and lock in place using the three lamp locking screws.

6Replace the lamp cover.

Align the cover, and press it in, then tighten the screws loosened in step 3 until the lamp cover is no longer loose.

2

1

CAUTION

•If you have been using the projector, the lamp will be very hot, and may cause burn injuries. Wait for the lamp to cool (for longer than 1 hour) before replacing it.

•If the lamp should break, please handle with care to avoid injury due to broken pieces ( p.49 ) and contact your dealer for repair service.

1Unplug power cord.

2Wait until lamp is sufficiently cooled.

Wait for at least 1 hour.

7Reset the lamp time.

See the lamp’s manual for instructions on resetting the lamp time.

Notes and Precautions

• The [Lamp time] item in the Status display menu indicates the time of lamp use (as a

rough guide) p.44

• Please replace the lamp after 2000 hours of use with [Lamp power] in the Default

setting 1 menu set to [Standard], and 3000 hours of use with [Lamp power] in the

Default setting 1 menu set to [Low]. p.42

• There are cases that the lamp can not work before the above mentioned period expires

or before the replacement message is displayed.

• Attach the lamp cover correctly so that it is not loose. If it is not attached correctly, the

3Remove the lamp cover.

Loosen the two screws, raise the lamp cover with your fingers as shown to remove the lamp cover. Use care to avoid any damage to nails and/or tip of your finger(s). If you have any difficulty in removal, you can use a screwdriver or any other smaller tool for your convenience.

4Pull out the lamp.

Loosen the three lamp locking screws, pull up the handle, and remove the lamp.

3

Lamp cover

1

2

4

1

2

projector may fail to be powered on or the lamp may fail to come on.

• Always replace the lamp with a new one.

• The lamp is made out of glass. Do not touch the glass surface with your bare hands,

bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)

About lamp replacement messages

•The lamp replacement message of this projector displays an appropriate period according to the use period for [Standard] / [Low] of the [Lamp power] respectively.

•When the replacement time approaches, the message of “The lamp life is ending. Please change the lamp.” and the icon are displayed every time the power is turned on. This display disappears when you press the button.

Used Lamps

This projector’s lamps contain trace amounts of environmentally harmful inorganic mercury. Be careful not to break used lamps, and dispose of them in accordance with local regulations.

Maintenance

50

51

Page 25 Page 27
Image 26
Page 25 Page 27
Contents TLP-X2500 Safety Precautions USA onlyImportant Safety Instructions Important Safety Instructions Place and Manner of Installation Power Supply Cord SelectionImportant Precautions Save Original Packing MaterialsOther Cautions and Informations Remote Control BatteriesExemption Clauses Contents Checking the package contents Names of each part on the main unitRemote Control TLP-XC2500 Remote Control TLP-X2500Remote control Control panelNames of the terminals on the rear panel CameraOperating the remote control Preparing and using the remote controlLoading dry-cell batteries into the remote control Connecting a computerConnection PlacementPlacement Styles Before connectionConnection Turning the power on and offLabel locations Turning the power on and off Basic operationsUsing handy features Basic operationResizing image Using handy featuresChanging picture mode Cutting off the picture and sound temporarily MuteFreezing the image Freeze Setting the passwordChanging screen size Select OFF Select OK and press the button Image adjustment menu Using the menusHow to use the menus Detailed description Screen size Using the menusDisplay setting menu Reset logo Blackboard modePrecaution Up/down shiftDefault setting 2 menu Default setting menuDefault setting 1 menu Preparation of the document camera Using the document cameraDisplaying Information Status display Key lockUsing the document camera Image projection with the document cameraLocking the white balance When the lamp is brokenAbout lamp Press W.BALANCE button and lock the white BalanceLamp replacement Air filter cleaning Lens and main unit cleaningBefore calling service personnel Trouble indicationsList of supported signals RGB signals SpecificationsList of general specifications SpecificationList of supported signals Video, S-Video signals SpecificationsList of supported signals Y/PB/PR signals Separately sold product

TLP-XC2500, TLP-X2500 specifications

The Toshiba TLP-X2500 and TLP-XC2500 projectors are designed to deliver high-quality images and versatile functionality for both professional and educational environments. These projectors are known for their advanced features, compact design, and easy operational capabilities, making them an excellent choice for a variety of applications.

One of the main features of the TLP-X2500 and TLP-XC2500 is their impressive brightness levels. With a high lumens output, these projectors ensure vibrant and clear images even in well-lit rooms. This capability is crucial for presentations, classrooms, and conference settings where ambient light cannot be controlled easily.

The resolution of these projectors is another notable characteristic. The TLP-X2500 offers XGA resolution, providing sharp and detailed visuals that enhance the viewing experience. The TLP-XC2500 takes it a step further with a higher resolution capability, making it suitable for detailed graphic presentations and multimedia usage.

Both projectors incorporate advanced image technologies, including Enhanced Color Management and BrilliantColor technology. These features contribute to accurate color reproduction, allowing for vivid and realistic images. The projectors also support a range of aspect ratios, accommodating different content formats and viewing preferences.

Interconnectivity is a strong point of the TLP-X2500 and TLP-XC2500. The models offer multiple input options, including HDMI, VGA, and composite, enabling users to connect various devices with ease. This versatility makes the projectors ideal for use with laptops, DVD players, and other multimedia devices.

Portable and lightweight, the TLP-X2500 and TLP-XC2500 are designed for mobility. They come equipped with a user-friendly interface, allowing for quick setup and operation. These features make them suitable for on-the-go presentations and dynamic learning environments.

Furthermore, Toshiba emphasizes energy efficiency in these models. The projectors are engineered to reduce power consumption while maintaining performance, contributing to lower operational costs and a reduced environmental footprint.

In summary, the Toshiba TLP-X2500 and TLP-XC2500 projectors stand out for their brightness, resolution, color accuracy, and connectivity options. Their design and energy-saving features position them as valuable tools for enhancing presentations and educational experiences across various settings. With reliable performance and extensive capabilities, these projectors are well-suited for anyone looking to make a lasting impression.
Top Page Image Contents