Toshiba TLP-X2500, TLP-XC2500 Using the menus, How to use the menus, Image adjustment menu

on the control panel (main unit side) and remote control.

Using the menus

You can call up on-screen menus, and conduct a number of adjustments and settings using the operation buttons p.16

■How to use the menus

The menu shown below is for operation instructions purposes and might differ from the actual display.

■The image adjustment menu

Use this menu to set or adjust image-related items. Items that can be set or adjusted are marked with “Yes”, and those that cannot are marked with “No”. (When an item is masked, it indicates that you cannot select for the current input.)

Item Description Computer Y/PB/PR Video S-video(XC2500)Camera

1.Press the MENU button

2.Select a Category

Select a category by using . There are following 5 categories:

Image adjustment menu p.37

Display setting menu	p.39
Default setting 1 menu	p.42
Default setting 2 menu	p.43
Status display menu	p.44

Display the Setting display menu.

Displays the current adjustments and settings of selected category.

Item shown with gray cannot be adjusted with the current input source.

Contrast	Adjust the image contrast.			Yes	Yes	Yes	Yes	Yes
		Lower	Higher
Brightness	Adjust the brightness of the image.			Yes	Yes	Yes	Yes	Yes
		Darker	Brighter
Color	Adjust the color of the image.			No	Yes	Yes	Yes	No
	Lighter		Deeper
Sharpness	Adjust the sharpness of the image.			Yes	Yes	Yes	Yes	Yes
		Softer	Sharper
Noise	Set the function to reduce screen noise.			No	Yes	Yes	Yes	No
reduction*1	On (Enable)		Off (Disable)
NCE mode	Press	. Toggle the NCE mode with		Yes	Yes	Yes	Yes	No
	.	1/2/3

3.Adjustments & Settings Press or to open the menu.

			Item
			Adjustment/Setting Value					These marks
								signify that
								there are setting
		These marks signify						screens. Press
								or	to
		the items can be		These marks				display a list of
		adjusted/set by using		signify that there				setting screens.
	.			are options.
				Press	or
				to display a list of
				options.
These marks signify the items can							* When no item is
be selected from the list by using							changed, press			.
.
After an item is selected, apply it by				Toggle items with		.
pressing	.			Select items with			and press	.
				Fix selection with		.

•The figure shows displays given for operation instructions purposes. As the display may differ depending on the item, use the following pages as a reference.

•To return to previous item, press the RETURN button.

4. End Press the MENU button.

(The menu disappears about 30 seconds after the last operation.)

/	R-level	Adjust red of the image color.			Yes	Yes	Yes	Yes	Yes
/
		Less red		More red
	G-level	Adjust green of the image color.			Yes	Yes	Yes	Yes	Yes
		Less green		More green
	B-level	Adjust blue of the image color.			Yes	Yes	Yes	Yes	Yes
		Less blue		More blue
	NTSC mode*2	Set the black level with		.	No	No	Yes	Yes	No
		US	: NTSC (US) mode
		JAPAN	: NTSC (JAPAN) mode
	Auto setting	Automatically adjusts items such as the			Yes	No	No	No	No
		samplingphase depending on the type of
		input signal.
	Position	Press	then change mode using		Yes	No	No	No	No
		and adjust with		.
		Phase			Yes	No	No	No	No
		Adjust to eliminate flicker.
		Frequency			Yes	No	No	No	No
		Adjust to eliminate periodic patterns and
		flickering when many fine vertical lines
		appear on the screen.
		H-position			Yes	No	No	No	No

Adjust the horizontal position of the image.

Operations

36 37