Toshiba Explore GPI and HP 100 Programming Features for Network Cards

Data Access Panel DP 100

The DP 100 is used primarily for viewing and changing timers, counters and data register values. It does not allow modification of the program logic . The DP 100 can also display user defined ASCII diagnostic messages and list their order of occurrence. The display is backlit for easy viewing in dark areas. The DP 100 can mount directly on the face of the EX250 or EX500, or be connected with a 2 meter cable .

M///∎/UM/M/

TOSHIBA

Handy Programmer HP 100

The HP100 is hand-held graphic programmer . Its portability makes it ideal for maintenance use at remote locations . The HP 100 has all the features of a full size programming terminal .

• Enter programs in ladder logic

• On-line program monitor & edit (logic intensifies to indicate power flow)

• Block monitor for I/O and data registers

• On-line data set & I/O force

• Two display modes

- Full: 5 lines by 11 col .

- Zoom : Full device description

Graphic Programmer GPI 10

The GP 110 has a large dot matrix LCD screen that displays 7 lines by 11 columns . Logic lines intensify to indicate power flow . Device type, de- vice address, current values in timers and counters, and data register values are shown during program execution . The GP 110's advanced features include :

•Backlit screen

•On-line programming

•Stand alone programming (AP 1 & AP2)

•Floppy disk drive interface (AP1& AP2)

	0 NOON	∎∎///
N		∎∎∎∎∎
		:::::
	so mom	:_:::
	mom	∎ ∎∎∎