Toshiba ETB003Z instruction manual Safety precaution

Page 3

E6581339⑥

Limitation of use

Safety precaution

Never use this unit with any device other than TOSVERT VF-AS1/PS1 series inverters. Doing so may cause an accident.

General Operation

 

Warning

 

Never disassemble, modify or repair.

Disassembly

Doing so could result in electric shock, fire and injury. For repairs, call your sales

prohibited

agency.

Do not attach this option to any inverter other than the VF-AS1/PS1. Doing so could result in electric shock or fire.

Don't place or insert any kind of object into the ETB003Z (electrical wire cuttings, rods, wires).

Prohibited

Doing so could result in electric shock or fire.

 

Do not allow water or any other fluid to come in contact with the ETB003Z. Doing so could result in electric shock or fire.

If the inverter begins to emit smoke or an unusual odor, or unusual sounds, immediately turn off the VF-AS1/PS1.

 

If the equipment is continued in operation in such a state, the result may be fire. Call

Mandatory

your local sales agency for repairs.

Do not touch the sharp portions (such as leads of parts on the board, the corner of board, or etc.) on this option. It may lead to injuries.

Caution

Mandatory

This option is an electrostatic discharge sensitive device. Handle it, where the environment is protected against electrostatic electricity.

Otherwise, permanent damage to device will result.

Transportation & installation

Warning

Do not apply a dropping shock or other physical shocks. Otherwise, damage or malfunction will result.

Do not install or operate the inverter if it is damaged or any part of it is missing.

Prohibited

Operating a defective inverter may lead to electric shocks or fire.

For repairs, call your sales/repair agency.

 

Do not put any flammable material near the product.

It may catch fire due to the product sparking in the case of a malfunction.

Use this product under the environmental conditions prescribed in the instruction manual.

Usage it under any other conditions may result in malfunction.

Mandatory

An emergency stop device must be installed that fits with system specifications

(e.g. shut off input power then engage mechanical brake).

 

 

Operation cannot be stopped immediately by the inverter or this unit alone, thus risking

 

an accident or injuries.

 

 

 

2

Image 3
Contents Expansion IO Card Option Safety precautions Safety precaution E6581339⑥ Confirmation on accessories IntroductionType of expansion IO option card Contents Name and function of each section AppearanceName of each section terminal Connection to the inverter Installing the IO card option in the VF-AS1/PS1Input/output terminal interface WiringTH1+ Tripping value about under 70 ohm Monitor Functional descriptionMulti-function output terminal ParameterMulti-function input terminal 10V power supplyExternal thermal trip input TH1+, TH1 External diagram of option unit mm External diagramSpecification Environment SpecificationControl specification Warranty