Toshiba B-SV4T owner manual A1.3.2 Detection Area of the Transmissive Sensor

APPENDIX 1 SPECIFICATIONS

ENGLISH VERSION EO1-33062

A1.3 Media

A1.3.1 Media Type (Cont.)

				Unit: mm (inch)
Issue mode		Batch mode	Strip mode	Cut mode
Item
c Width including backing paper			20 to 112 (0.8 to 4.4)
d Media width			17 to 109 (0.7 to 4.3)
	Label	12 to 609.6 (0.5 to 24.0)	27.4 to 154.4	27.4 to	609.6
e Media pitch			(1.1 to 6.1)	(1.1 to	24.0)
	Tag	10 to 609.6 (0.4 to 24.0)	-----	25.4 to	609.6
				(1.1 to	24.0)
f Media length		10 to 607.6 (0.4 to 23.9)	25.4 to 152.4	25.4 to	607.6
			(1.1 to 6.0)	(1.1 to	23.9)
g Gap length		Min. 2	(0.08)	Min. 6 (0.2)
h Black mark length			Min. 2 (0.08)
Thickness		0.06 to 0.19 (0.002 to 0.007)
Max. outer roll diameter			Ø127 (5)
		Ø214 (8.4): When the optional External Media Roll Hanger is used.
Roll direction			Outside
Inner core diameter		25.4, 38.1, or 76.2 (1, 1.5, or 3) (See NOTE 2.)

NOTES:

1.To ensure print quality and print head life use only TOSHIBA TEC approved media.

2.When using a media roll of 76.2-mm (3”) inner core diameter, the 3”-Diameter Media Shaft included in the optional External Media Roll Hanger is required.

A1.3.2 Detection Area of the Transmissive Sensor

The Transmissive Sensor is positioned at 6 mm from the right edge of media.

The Transmissive Sensor detects a gap between labels, as illustrated below.

	Area to be detected.
Sensor position
		Label
Min. 2 mm		Gap
(Min. 6 mm:		Label
cut mode)
	Min. 8 mm

Sensor position

Print side

Media feed direction

6 mm

EA1- 3