Toshiba B-SV4D owner manual Connecting the Power Adapter and the Power Cord

2. PRINTER SETUP

ENGLISH VERSION EO1-33061

2.5 Connecting the Power Adapter and the Power Cord

2.5Connecting the Power Adapter and the Power Cord

NOTES:

1.Since the power cord is not enclosed in this printer, please purchase a proper one after referring to page 1-2.

2.The EA10953 AC adapter should be exclusively used for the B-SV4D Series printer. The B-SV4D Series printer must be powered by the EA10953 AC adapter.

1.Make sure that the printer power switch is in the OFF (O) position.

2.Insert the Power Cord into the inlet of the Power Adapter.

Power Cord

Power Adapter

3.Insert the Power Adapter connector into the Power Jack on the rear of the printer.

Power Jack

Power Adapter Connector

4.Plug the other end of the Power Cord into a grounded outlet as shown in the figure below.

E2- 4