Toshiba B-EV4T owner manual Loading the Ribbon, Broken

Page 25

2. PRINTER SETUP

ENGLISH VERSION EO1-33087

2.8 Loading the Ribbon

2.8 Loading the Ribbon

WARNING!

1.Do not touch any moving parts. To reduce the risk of fingers, jewellery, clothing, etc. being drawn into the moving parts, be sure to load the media once the printer has stopped moving completely.

2.To avoid injury, be careful not to trap your fingers while opening or closing the cover.

When you use normal media, it is necessary to load a ribbon. Follow the procedure below to load a ribbon properly.

1.Press down the Top Cover Release Button to unlock the Top Cover, then fully open the Top Cover.

Top Cover

Top Cover Release

Button

CAUTION!

Be careful not to touch the Print Head Element when opening the Top Cover.

Failure to do this may cause missing dots by static electricity or other print quality problems.

NOTES:

2.Fit the core of the Ribbon Supply Roll into both the Spring Guide Wheel and the Guide Wheel (Supply side).

(1)Push the right side of the core of the Ribbon Supply Roll against the Spring Guide Wheel and fit the wheel into the core.

1. Do not load a ribbon when

using direct thermal media.

Doing so may damage the

print head or stained with

melted ribbon, which requires

a replacement of the print

head.

Ribbon Supply Roll

Spring Guide Wheel (Supply side)

2. Be sure to load the ribbon so

that the ink side contacts with

the print side of the media. If

the ribbon is loaded inside

out, nothing can be printed,

and eventually the print head

will need to be replaced.

3. The Figure shows how to

distinguish between used and

unused sides of a halfway-

used ribbon.

4. As the ribbon is very thin, do

not pull the ribbon strongly.

Doing so may cause the

ribbon to be stretched or

broken.

(2)Fit the left side of the core of the Ribbon Supply Roll to the Guide Wheel, aligning the notch of the ribbon core with the protrusion of the Guide Wheel.

Hold the ribbon firmly while loading it, as it is easily loosened or unrolled.

E2-14

Image 25
Contents EV4T Series Vorsicht CE Compliance for EU onlyMeanings of Each Symbol Safety SummaryRequest Regarding Maintenance PrecautionsTable of Contents For EU only EA2-1Product Overview Introduction Features Unpacking AccessoriesSVT H05VV-F When purchasing the power cordFront View DimensionsRear View Interior Printer status Button and Indicator LampPrecautions Printer SetupTurning the Printer Procedure before OperationTurning on the Printer Turning OFF the Printer Connecting the Cables to the Printer Connecting the Power Adapter and the Power Cord To open the Top Cover Opening/Closing the Top CoverTo close the Top Cover Loading the Media Open the Media Holders 1 Media Sensor Calibration Batch mode How to set the media Strip mode OptionCut mode Option How to Load Fanfold Paper StockExternal Media Roll Hanger Option Broken Loading the RibbonPrint Head Block Ribbon Access Cover Close the Ribbon Access Cover until it clicks Media Sensor Test, and Dump Mode different type UtilitiesMedia Sensor Calibration Print test label sample Self Print Test and Dump ModeE2-19 „ Inserting an SD Card How to Use an SD Card„ Removing an SD Card Cleaning MaintenancePrint Head Platen/Sensors Media HousingCover Option Care/Handling of the Media and RibbonTroubleshooting Guide TroubleshootingStatus Lamp Color Status Cause SolutionsRemoving Jammed Media A1.1 Printer Appendix 1 SpecificationsEV4T-TS14-QM-R A1.3 Media A1.2 OptionsA1.3.1 Media Type LabelA1.3.2 Detection Area of the Transmissive Sensor A1.3.4 Effective Print Area A1.3.3 Detection Area of the Reflective SensorFigure below shows the effective print area on the media A1.4 RibbonInterface Cables Appendix 2 InterfaceBar code GlossariesSupply EO1-33087C

B-EV4T specifications

Toshiba B-EV4T is a versatile and robust thermal transfer printer designed for various industries, including retail, logistics, and manufacturing. This printer stands out for its impressive performance, reliability, and user-friendly features, making it an ideal choice for businesses requiring efficient label printing solutions.

One of the main features of the B-EV4T is its compact design, which allows it to fit into tight workspaces without sacrificing performance. Despite its small footprint, the printer delivers high-quality printing at speeds of up to 200mm per second, ensuring that users can complete their labeling tasks quickly and efficiently.

The B-EV4T is equipped with advanced thermal transfer printing technology, enabling it to produce sharp, clear images and crisp text. This technology ensures that labels are durable and resistant to fading, making them suitable for both indoor and outdoor applications. The printer supports a wide range of media types, including paper, synthetic materials, and various label sizes, providing flexibility for diverse printing needs.

Another noteworthy characteristic of the B-EV4T is its ease of use. The printer features a user-friendly interface and an intuitive LCD display that simplifies operation and maintenance. Users can easily navigate through settings and perform tasks such as adjusting print density and label width. Additionally, the modular design of the printer allows for easy access to components, making it straightforward to load media and replace ribbons.

Connectivity is a crucial aspect of modern printers, and the B-EV4T does not disappoint. It offers multiple connectivity options, including USB, Ethernet, and serial interfaces. This versatility allows seamless integration with various systems and networks, ensuring that the printer can be easily incorporated into existing workflows.

The printer is also designed with energy efficiency in mind, reducing power consumption without compromising performance. This not only helps businesses save on energy costs but also contributes to a more sustainable operational approach.

In summary, Toshiba's B-EV4T thermal transfer printer is a reliable and efficient solution for businesses requiring high-quality label printing. With its compact design, advanced printing technology, user-friendly features, and versatile connectivity options, the B-EV4T stands out as a top choice for meeting diverse labeling demands across multiple industries.