Toshiba B-EV4T owner manual Print Head Block Ribbon Access Cover

2. PRINTER SETUP

ENGLISH VERSION EO1-33087

2.8 Loading the Ribbon

2.8Loading the Ribbon (Cont.)

3.Push up the Ribbon Access Cover by the portions indicated by arrows A and fully open it supporting the Print Head Block.

A

Print Head

Block

Ribbon Access

Cover

A

NOTE: Ribbon Path

Print Head

Ribbon

Take-up

Core

Ribbon Supply

Roll

4.Fit the Ribbon Take-up Roll to the Spring Guide Wheel and the Guide Wheel in the same way as the Ribbon Supply Roll.

(1)Push the right side of the core of the Ribbon Take-up Roll against the Spring Guide Wheel and fit the wheel into the core.

(2)Fit the left side of the core of the Ribbon Take-up Core to the Guide Wheel, aligning the notch of the ribbon core with the protrusion of the Guide Wheel.

Spring Guide Wheel (Take-up side)

Guide Wheel

5.Turn the Ribbon Rewind Gear to wind the ribbon leading film onto the Ribbon Take-up Core until the ink ribbon covers the Print Head, and remove any slack of the ribbon.

Ribbon

Rewind Gear

E2-15