Toshiba B-470-QQ Series owner manual Groove Ridge

Page 14

6. LOADING THE MEDIA

EM1-33033

6. LOADING THE MEDIA

4.Put the media on the supply shaft.

5.Pass the media around the damper, then pull the media towards the front of the printer.

6.Insert the ridge of the supply holder into the groove of the supply shaft until the media is fixed. Then turn the locking ring clockwise to secure the supply holder. This will centre the media automatically. NOTE: Do not over tighten the locking ring of the supply holder.

 

Groove Ridge

Damper

 

 

 

Projection

 

Supply Holder

 

Media

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Supply Shaft

Fig. 6-3

7.Insert the media into the paper holders of the media guide, adjust the media guides to the media width, and tighten the locking screw.

8.Check that the media path through the printer is straight. The media should be centered under the print head.

Media Guide

Media

Supply Holder

 

Media Guide

 

Paper Holder

Paper Holder

Print Head

Locking Screw

Media

Fig. 6-4

NOTE: When using the label rolled with labels facing outside, please remove the upper plates of both paper holders using the following procedure. Failure to do this may cause a paper jam error.

If you have any questions, please contact your nearest TOSHIBA TEC service representative.

6-2

Page 13 Page 15
Image 14
Page 13 Page 15
Contents QQ Series Energy Star is a U.S. registered mark Safety Summary Precautions Request Regarding MaintenanceTable of Contents Applicable Model AccessoriesIntroduction 7 2 Q QSpecifications PrinterOption Ribbon MediaOperation Panel OverviewFront/Rear View DIP Switch Functions Turn the Power OFF before switching the functionsExpansion I/O Interface 24 pins, Male Installing the PrinterCentronics Interface 36 pins, Male RS-232C InterfaceLoading the Media Groove Ridge Removing the paper holders upper plates from the media guide An easy way to set the black mark sensor position Batch type Strip typeBuilt-in rewinder type Loading the Ribbon Inserting the Optional Flash Memory Card STI-FL/4ACARE/HANDLING of the Media and Ribbon General Maintenance CleaningCovers and Panels Removing Jammed PaperCleaning the Cutter Unit Threshold Setting L I N EAuto Ribbon Saving Mode Troubleshooting Error Message Problem SolutionFlash Write Problem Solution Page

B-470-QQ Series specifications

The Toshiba B-470-QQ Series is a highly acclaimed range of industrial printers designed to meet the demands of various labeling and printing applications. Known for their reliability and efficiency, these printers are ideal for environments where durability and quality are paramount. The B-470-QQ series combines advanced technology with user-friendly features, making it a top choice in the industrial sector.

One of the main features of the B-470-QQ Series is its impressive print speed. Capable of delivering up to 6 inches per second, this speed ensures that high-volume printing tasks are completed swiftly without compromising on quality. The printers are equipped with a high-resolution printing capability, typically offering resolutions of up to 300 dpi, which results in sharp and clear labels, barcodes, and other printed materials.

In addition to speed and quality, the B-470-QQ Series boasts advanced thermal transfer and direct thermal printing technologies. This versatility allows users to select the most suitable printing method for their specific needs. Thermal transfer printing is particularly valuable for creating long-lasting labels that resist fading and abrasion, making them ideal for outdoor use or harsh environments.

The B-470-QQ Series also incorporates a user-friendly interface, featuring a large LCD display and intuitive controls. This design simplifies the printing process, allowing operators to adjust settings and monitor print jobs with ease. Moreover, the printers support a wide range of media types and sizes, accommodating various label formats and materials. This flexibility ensures that businesses can produce customized labels for specific applications, enhancing efficiency in their operations.

Another notable characteristic of the B-470-QQ Series is its robust construction. Built to withstand the rigors of industrial environments, these printers are designed for longevity and minimal maintenance. Additionally, connectivity options such as USB, Ethernet, and serial interfaces facilitate easy integration into existing networks and systems.

In summary, the Toshiba B-470-QQ Series stands out for its high-speed printing, advanced technology, user-friendly features, and durable design. These characteristics make it an excellent choice for businesses looking to enhance their labeling and printing capabilities while ensuring consistent performance and high-quality results. With the B-470-QQ Series, Toshiba solidifies its reputation as a leading provider of innovative printing solutions in the industrial market.
Top Page Image Contents