Toshiba B-450-HS-QQ owner manual Guide Wheel

Page 15

7. LOADING THE RIBBON

EO1-33019

7. LOADING THE RIBBON

5. Set the ribbon core (supply side) by fitting the protrusion into the notch.

Fig. 7-3

6. Turn the guide wheel in the direction indicated by the arrow to remove any slack on the ribbon.

NOTE: Make sure that the ribbon has no wrinkles and the protrusions are fitted into the notches of the ribbon cores.

Guide Wheel

Fig. 7-4

7-2

Image 15

Contents HS-QQ Series Page Safety Summary Request Regarding Maintenance PrecautionsTable of Contents 5 2 H S 1 2 Q Q AccessoriesIntroduction Applicable ModelSpecifications General SpecificationsPrinting Specifications Option Ribbon SpecificationsAppearance FRONT/REAR ViewOperation Panel Turn the Power OFF before changing the DIP switches DIP Switch FunctionsSET UP Procedure Setting UP the PrinterRequirements for Operation Installation Procedure Installing the Supply Holder UnitInstalling the Supply Cover Connecting the Power Cord and Cables Loading the Ribbon Guide Wheel Loading the Paper Page Loading the Paper Strip type Setting the black mark sensor position Setting the feed gap sensor position Pause Threshold SettingCARE/HANDLING of the Paper and Ribbon Cleaning General MaintenanceCovers Removing Jammed Paper Cleaning the Cutter UnitCleaning the Strip Unit Error type Problem Solution TroubleshootingProblem Solution Head ErrorAppendix ON-LINE LED IndexPage