Toshiba B-450-HS-QQ owner manual Loading the Paper

Page 18

8. LOADING THE PAPER

EO1-330019

8. LOADING THE PAPER

10.For details on changing the black mark sensor position according to the black mark position, refer to the Section “Setting the black mark sensor position”. When using the round or pre-printed label, refer to the Section “Setting the feed gap sensor position” and adjust the sensor position.

11.Draw the label onto the platen. Close the sensor cover and return the lock lever to lock the sensor cover tight.

12.Close the print head block by pressing both sides of the print head block’s top until it clicks.

Head Block

Fig. 8-7

NOTE: Pass the paper straight from the supply holder to paper outlet. Failure to do this may cause skew feeding or paper jam.

Platen Paper Guide Paper

Supply Holder

A

.

A = B

.

B

Fig. 8-8

8-3

Image 18

Contents HS-QQ Series Page Safety Summary Precautions Request Regarding MaintenanceTable of Contents Applicable Model AccessoriesIntroduction 5 2 H S 1 2 Q QSpecifications General SpecificationsPrinting Specifications Ribbon Specifications OptionAppearance FRONT/REAR ViewOperation Panel DIP Switch Functions Turn the Power OFF before changing the DIP switchesSET UP Procedure Setting UP the PrinterRequirements for Operation Installation Procedure Installing the Supply Holder UnitInstalling the Supply Cover Connecting the Power Cord and Cables Loading the Ribbon Guide Wheel Loading the Paper Page Loading the Paper Strip type Setting the black mark sensor position Setting the feed gap sensor position Threshold Setting PauseCARE/HANDLING of the Paper and Ribbon General Maintenance CleaningCovers Cleaning the Cutter Unit Removing Jammed PaperCleaning the Strip Unit Troubleshooting Error type Problem SolutionHead Error Problem SolutionAppendix Index ON-LINE LEDPage