Toshiba 2000 user manual Installation

Page 49

3.4 About the PC card

3.4.1Installation

(1)Press the eject button of the PC card slot until the eject button pops out.

(2)Press the eject button once more. The dummy card ejects.

(3)Remove the dummy card.

Store the dummy card in a safe place.

(4)Check the direction and insert the PC card.

Gently press the PC card all the way in and connect securely. Do not exert excessive force.

(5)Connecting cable to the PC card.

Connect the cable in case of a card that needs a cable such as LAN card or modem card.

After connecting the card, check that the card is ready.

Refer to the PC card environment setup in the "PC Card

Manual."

CAUTION

• Do not transport with the cable attached.

If you do, the cable connector may be damaged.

•Do not pull on the cable strongly with the cable attached. The PC card may become loose.

3

6F8C1111

29

Image 49

Contents Integrated Controller Vseries Important Information Safety Precautions Markings used on the model 2000 and in this Manual Precautions on Installation Precautions on Wiring Precautions for Operation Safety Precautions on Maintenance and Inspection Safety Precautions on Replacing Components Safety Precautions in Daily Operation Safety Precautions on Disposal Limitation of Applications Preface Related Manuals Procedure flow Notational convention Guide to Reading this Manual Excellent system performance Functions and FeaturesContents Hardware Setup･････････････････････････････39 Checking the Content of the Package Before Turning On the PowerDIP-SW Name and Function of Each PartName and Function of Each Part RST EMC Installation RequirementsComputer module C2PU37 User’s Manual 24VDC Power RequirementsWhen turning Off the Power Precautions when usingDaily use About the Hard Disk DriveRadio Wave/Power Voltage Interference Daily Cleanup and Storage/TransportationRepair and Service About the External FDDDisposal Module disposal Battery disposalProcedure InstallationBefore Getting Started Precautions when Installing in the Case Installing BasesModule Installation Grounding Tips GroundingGrounding method Installation Grounding connection between base Wiring of the power supply Wiring of the power supply 6E8C1111 Connector Connection Turning On the Power Power On and Power OffTurning Off the Power HandlingPower Supply module PS694 with Battery Power Off with Windows6F8C1111 UPS Power Supply module PS691 with UPS I/FHard Disk Handling About the Hard Disk Floppy Disk Handling About the External FDDWrite Protecting a Floppy Disk To enable writeAbout the PC Card Installation Removal Daily Inspection MaintenancePeriodic Maintenance CRT Replacement Timing of Major PartsReplacing the Hard Disk Drive How to Remove the HDD packIntalling the HDD pack RAS Function RAS Hardware RAS Function OverviewRAS Support Software Interrupt Signals WDT Circuit and Hardware ResetHardware Processing RAS Functions RAS MemoryMI events NMI eventsHardware Setup Setting the Bios Xxxxxx KB Boot Main Advanced An error message appears Power does not turn onAppendix a Q&A Screen display is improper No character is entered when a key is pressedMouse does not work Operating system does not startFloppy disk drive cannot be used Application program cannot be usedFloppy disk cannot be used Television and radio interference appears If the problem is still not solvedCase of trouble or malfunction Specifications Appendix B Device SpecificationsModels RGB Interface Interface SpecificationsSerial Interface RS-232C USB Interface Keyboard and Mouse InterfaceEthernet Interface FDD Interface Pcmcia card slot Page 6F8C1111

Related manuals

Manual 181 pages 57.66 Kb