Toshiba 1600EP Series manual Product Description, Application and Use, Output Rating, Power Backup

Page 13

Product Description

An uninterruptible power system is a system that is installed between the commercial power and the load equipment. The UPS provides steady AC output power during commercial power short-term blackouts or brownouts. This power is provided for a long enough time so that the load can be shut down in an orderly fashion. This prevents loss of data and possible damage to both hardware and software.

During normal operation, the UPS uses commercial AC power. It absorbes all of the high voltage spikes and transients caused by switching and faults, and all of the common-mode and normal mode noise which is associated with commercial AC power. The UPS converts it all to flat DC power. From this power, the UPS charges its batteries and generates its own extremely high quality AC waveform output. The result of this process is maximum power conditioning and regulation.

If the AC power supplied to the UPS drops below a specified voltage level, the unit’s batteries automatically begin supplying power instead of receiving it. This insures that the loads connected to the UPS continue to receive power with no interruption. When AC input power becomes available again, operation returns to normal. The unit’s batteries begin to recharge so they will be ready for the next power interruption.

Application and Use

Toshiba 1600EP Series of on-line uninterruptible power system (UPS) provides continuous computer- grade AC power in a compact, high performance, and energy efficient unit. The UPS unit assures safe and reliable operation of critical office equipment. This can range from word processors and personal computers to mini-computers and local area networks. All units feature an audible alarm which sounds if the battery voltage drops below a specified minimum during use. This is an additional aid to help in retaining the valuable office data banks. All units allow for computer interfacing.

Output Rating

Toshiba 1600EP Series (208/240V) offers UPS models with the following capacities:

MODEL

Output Capacity @ 240 V

Output kW @ .85PF 240 V

UE3G2L036C61TRoHS*

3.6 kVA

3.1 kW

UE3G2L036C61T

3.6 kVA

3.1 kW

UE3G2L060C61T

6 kVA

5.1 kW

UE3G2L080C61T

8 kVA

6.8 kW

UE3G2L100C61T

10 kVA

8.5 kW

UE3G2L140C61T

14 kVA

11.9 kW

UE3G2L180C61T

18 kVA

15.3 kW

UE3G2L220C61T

22 kVA

18.7 kW

*UE3G2L036C61TRoHS is RoHS compliant with the batteries being exempt from the directive.

Power Backup

When an electrical power failure occurs, the UPS’s internal batteries automatically supply back-up power to the load without interruption. For example, when used to support a computer, the UPS back-up assures enough additional time to complete the activity and store the data. This allows an orderly shutdown after a power failure has occurred.

Power Conditioning

When commercial power is present, the UPS supplies conditioned power to the load while maintaining its batteries in a charged condition. The UPS protects against the normal, everyday problems associated with heavy use of raw commercial power, including power sags, surges, signal interference, and spikes. This protection keeps power-line problems from reaching your load, where they can cause equipment to operate erratically, or damage software and hardware.

1600EP Series Instruction Manual

Image 13
Contents 1600EP Series Page Qualified Personnel only Product Use and Warranty RestrictionsUninterruptible Power System UPS Toshiba Customer Support Center PurposeToshiba Customer Support Center Toshiba International CorporationThis page intentionally left blank Table of Contents Display Screens Preventive Maintenance/Parts ReplacementUPS Protection System IndexSymbols General Safety InstructionsProhibited Symbol indicates do not take action Signal Words Qualified personnel shall Important Safety InstructionsTo be performed by Qualified Personnel Only Instructions Importantes Concernant LA SécuritéPower Conditioning Power BackupProduct Description Application and UseInspection Inspection/Storage/DisposalUnpacking StorageConductor Routing and Grounding Installation PrecautionsOperating Precautions 48518 Equipment Warning LabelsPage UPS Connections Wire Size and Tightening TorqueTerminal Block Communication Interfaces Pin Signal Function Logic UPSRemote Contacts Voltage CurrentApplicable OS Windows NT, IBM OS/2 LAN server, LANtastic UPS Stop Signal OperationRS-232C Pin Symbol DescriptionRemotEye II Network Card Standard Models 3.6kVA-RoHS 3.6kVA 6kVA 8kVA UPS SpecificationsRS232 Ascii Interface Standard Standard Models 3.6kVA-RoHS 3.6kVA 6kVA 8kVA cont’dStandard Models 3.6kVA-RoHS 3.6kVA 6kVA 8kVA cont’d Capacity KVA 8.5 kW1 Standard Models 10kVA 14kVA 18kVA 22kVAKVA 15.3 kW1 KVA 18.7 kW1 Capacity KVA 8.5 kW1 KVA 11.9 kW1 KVA 15.3 kW1 KVA 18.7 kW1 Standard Models 10kVA 14kVA 18kVA 22kVA cont’dCapacity KVA 8.5 kW1 KVA 11.9 kW1 KVA 15.3 kW1 KVA 18.7 kW Battery Low Voltage Tolerances Battery Backup Time and Discharge ProcessOperating the UPS 100% 20%Stopping the UPS Starting the UPSModel Vmax Vmin Icharge Battery RechargingOnline Mode Run operation Online ModeStatic-Bypass Mode Stop operation EPO Emergency Power Off Function Battery Backup Mode On batteriesCondition Audible Pattern Audible Alarm FunctionsFront Panel Layout Display and KeysLiquid Crystal Display LCD Functions Light Emitting Diodes LED Operating KeysKey Functional Description Behavior Significance/MeaningScreen Arrangement Display ScreensSystem Overview Screens UPS Start-Up Screens SequenceUps operation Load ###% Data Display Screens Stop Special Display ScreensData Setting Screens Auto RUN YES To Change Select Auto RUN no Data Setting Screens Cont’dAuto Retran YES To Accept SET Auto Retran no For Next Select Baud Rate To Accept SET To Begin SET Battery Test Inhibit LCD Message LED Message Meaning/Action System Warning MessagesMeaning System Fault MessagesLCD Message Meaning/Action Status Change IndicationsAction UPS Protection System System Protection FeaturesSystem Protection Functions Overheat DC-OV DC-OC Preventive Maintenance Preventive Maintenance/Parts ReplacementParts Replacement Optional Receptacle Panel Installation Instructions Optional MB Maintenance Bypass Units UPS Dimensional Data External Layouts/Dimensions/Shipping WeightsUnit and Shipping Weights Electrical Conduit Knock-out DataExternal Layout for 3.6 kVA-RoHS, 3.6 kVA, and 6 kVA units Air Index Page UPS Page Page Industrial Division

1600EP Series specifications

The Toshiba 1600EP Series is a notable entry in the landscape of multifunctional printers that has garnered attention for its robust performance and technological innovations. Targeted at small to medium-sized businesses, this series combines cost efficiency with high-quality output, making it an ideal choice for various office environments.

One of the standout features of the 1600EP Series is its impressive print speed. Capable of delivering up to 28 pages per minute, the printer significantly enhances productivity and meets the fast-paced demands of a modern office. Users can rely on quick first-page-out times, which is essential for handling numerous print jobs throughout the day.

In addition to speed, the Toshiba 1600EP Series emphasizes superior print quality. With a resolution of up to 1200 x 1200 dpi, it ensures that documents are sharp, clear, and professional-looking. Whether it’s text, graphics, or images, the printer excels in producing high-definition prints that can leave a lasting impression.

The 1600EP Series also integrates advanced digital technology, featuring a user-friendly touchscreen display that simplifies operation. This intuitive interface allows users to navigate through printing, copying, and scanning functions with ease. The series supports various paper sizes and types, enabling customization for different office needs.

Moreover, the Toshiba 1600EP Series is known for its sustainability features. It incorporates energy-saving modes and is designed for low power consumption, aligning with the growing emphasis on environmentally responsible practices in business operations. This eco-friendly approach is complemented by the use of long-lasting consumables, reducing the frequency of replacements and overall waste.

Networking capabilities are another highlight of the 1600EP Series. With built-in Wi-Fi and the option for mobile printing, users can connect seamlessly to various devices, enhancing accessibility and convenience. This flexibility ensures that employees can print from their smartphones, tablets, or laptops, streamlining workflow.

In summary, the Toshiba 1600EP Series stands out in the multifunction printer market, offering a blend of speed, quality, and innovative technology. Its user-centric design, coupled with sustainable features and strong connectivity options, makes it a reliable choice for businesses aiming to enhance their printing capabilities while maintaining efficiency and environmental responsibility. As organizations continue to seek reliable office solutions, the Toshiba 1600EP Series remains a compelling option worth considering.