Toshiba 1600EP Series manual Battery Backup Mode On batteries, EPO Emergency Power Off Function

Page 33

Battery Backup Mode (On batteries)

The following illustration shows power flow during the battery backup mode. When commercial AC power failures occur, the UPS’s batteries instantly begin supplying DC voltage to the UPS’s main inverter circuit. This circuit changes (inverts) the DC power into AC power. The AC power is available at the output of the unit.

This back-up process will continue until the UPS’s battery voltage drops below a specific minimum level. When this occurs, the batteries will stop supplying power to the load. This minimum level is the rated minimum voltage (Vmin). The rated battery voltage chart on page 23 shows (Vmin). The battery backup time and discharge process is explained on page 23.

Power flow in battery backup for all models

EPO (Emergency Power Off) Function

These units are equipped with terminals for receiving an emergency power-off (EPO) command via a closed-contact switch at a remote location (see Terminal Block Details on page 11 and terminal block location on page 37-38). This safety feature enables quick shut-down of the UPS’s AC output and battery circuits.

Usually the emergency power off switch is installed in a central location that is easily accessible to personnel concerned with the operation of the UPS unit and the load equipment connected to it. The EPO function is initiated by pressing the switch to the closed (shutdown) position.

The effect of using the EPO switch is the same whether the UPS unit is in AC input mode (see page 24), battery backup mode (see page 25), or the circuit bypass mode (see page 24). The following figure shows the UPS condition after application of the EPO switch.

Power flow after an EPO command for all models

1600EP Series Instruction Manual

25

Page 32 Page 34
Image 33
Page 32 Page 34
Contents 1600EP Series Page Qualified Personnel only Product Use and Warranty RestrictionsUninterruptible Power System UPS Toshiba Customer Support Center PurposeToshiba Customer Support Center Toshiba International CorporationThis page intentionally left blank Table of Contents Display Screens Preventive Maintenance/Parts ReplacementUPS Protection System IndexGeneral Safety Instructions SymbolsProhibited Symbol indicates do not take action Signal Words Qualified personnel shall Important Safety InstructionsTo be performed by Qualified Personnel Only Instructions Importantes Concernant LA SécuritéPower Conditioning Power BackupProduct Description Application and UseInspection Inspection/Storage/DisposalUnpacking StorageConductor Routing and Grounding Installation PrecautionsOperating Precautions 48518 Equipment Warning LabelsPage Wire Size and Tightening Torque UPS ConnectionsTerminal Block Communication Interfaces Pin Signal Function Logic UPSRemote Contacts Voltage CurrentApplicable OS Windows NT, IBM OS/2 LAN server, LANtastic UPS Stop Signal OperationPin Symbol Description RS-232CRemotEye II Network Card Standard Models 3.6kVA-RoHS 3.6kVA 6kVA 8kVA UPS SpecificationsRS232 Ascii Interface Standard Standard Models 3.6kVA-RoHS 3.6kVA 6kVA 8kVA cont’dStandard Models 3.6kVA-RoHS 3.6kVA 6kVA 8kVA cont’d Standard Models 10kVA 14kVA 18kVA 22kVA Capacity KVA 8.5 kW1KVA 15.3 kW1 KVA 18.7 kW1 Capacity KVA 8.5 kW1 KVA 11.9 kW1 KVA 15.3 kW1 KVA 18.7 kW1 Standard Models 10kVA 14kVA 18kVA 22kVA cont’dCapacity KVA 8.5 kW1 KVA 11.9 kW1 KVA 15.3 kW1 KVA 18.7 kW Battery Low Voltage Tolerances Battery Backup Time and Discharge ProcessOperating the UPS 100% 20%Stopping the UPS Starting the UPSModel Vmax Vmin Icharge Battery RechargingOnline Mode Online Mode Run operationStatic-Bypass Mode Stop operation EPO Emergency Power Off Function Battery Backup Mode On batteriesCondition Audible Pattern Audible Alarm FunctionsDisplay and Keys Front Panel LayoutLiquid Crystal Display LCD Functions Light Emitting Diodes LED Operating KeysKey Functional Description Behavior Significance/MeaningScreen Arrangement Display ScreensSystem Overview Screens UPS Start-Up Screens SequenceUps operation Load ###% Data Display Screens Stop Special Display ScreensData Setting Screens Auto RUN YES To Change Select Auto RUN no Data Setting Screens Cont’dAuto Retran YES To Accept SET Auto Retran no For Next Select Baud Rate To Accept SET To Begin SET Battery Test Inhibit LCD Message LED Message Meaning/Action System Warning MessagesMeaning System Fault MessagesStatus Change Indications LCD Message Meaning/ActionAction System Protection Features UPS Protection SystemSystem Protection Functions Overheat DC-OV DC-OC Preventive Maintenance/Parts Replacement Preventive MaintenanceParts Replacement Optional Receptacle Panel Installation Instructions Optional MB Maintenance Bypass Units UPS Dimensional Data External Layouts/Dimensions/Shipping WeightsUnit and Shipping Weights Electrical Conduit Knock-out DataExternal Layout for 3.6 kVA-RoHS, 3.6 kVA, and 6 kVA units Air Index Page UPS Page Page Industrial Division

1600EP Series specifications

The Toshiba 1600EP Series is a notable entry in the landscape of multifunctional printers that has garnered attention for its robust performance and technological innovations. Targeted at small to medium-sized businesses, this series combines cost efficiency with high-quality output, making it an ideal choice for various office environments.

One of the standout features of the 1600EP Series is its impressive print speed. Capable of delivering up to 28 pages per minute, the printer significantly enhances productivity and meets the fast-paced demands of a modern office. Users can rely on quick first-page-out times, which is essential for handling numerous print jobs throughout the day.

In addition to speed, the Toshiba 1600EP Series emphasizes superior print quality. With a resolution of up to 1200 x 1200 dpi, it ensures that documents are sharp, clear, and professional-looking. Whether it’s text, graphics, or images, the printer excels in producing high-definition prints that can leave a lasting impression.

The 1600EP Series also integrates advanced digital technology, featuring a user-friendly touchscreen display that simplifies operation. This intuitive interface allows users to navigate through printing, copying, and scanning functions with ease. The series supports various paper sizes and types, enabling customization for different office needs.

Moreover, the Toshiba 1600EP Series is known for its sustainability features. It incorporates energy-saving modes and is designed for low power consumption, aligning with the growing emphasis on environmentally responsible practices in business operations. This eco-friendly approach is complemented by the use of long-lasting consumables, reducing the frequency of replacements and overall waste.

Networking capabilities are another highlight of the 1600EP Series. With built-in Wi-Fi and the option for mobile printing, users can connect seamlessly to various devices, enhancing accessibility and convenience. This flexibility ensures that employees can print from their smartphones, tablets, or laptops, streamlining workflow.

In summary, the Toshiba 1600EP Series stands out in the multifunction printer market, offering a blend of speed, quality, and innovative technology. Its user-centric design, coupled with sustainable features and strong connectivity options, makes it a reliable choice for businesses aiming to enhance their printing capabilities while maintaining efficiency and environmental responsibility. As organizations continue to seek reliable office solutions, the Toshiba 1600EP Series remains a compelling option worth considering.
Top Page Image Contents