Toshiba 1600EP Series manual To Begin SET Battery Test Inhibit

Page 46

Data Setting Screens (Cont’d)

The following screens show the setting procedure for setting the data variables. They are accessed from the main Data Setting screens (see page 33) when the shift/select key is pressed:

Bat Test Interval

screen page 33

Cont’d from

data setting

TO BEGIN: SET

OR

BATTERY TEST

INHIBIT

Shift

+

Set

 

 

BATTERY TEST

Select

Monitor

###%

Executes battery test and returns

to Data Setting screens

This parameter has no options to set. A battery test will be performed once the SHIFT + SET button is pressed.

If the BAT TEST INHIBIT message is displayed, it indicates that a battery test has been performed recently. The UPS will not allow frequent bat- tery tests to insure that the batteries remain in a fully charged state.

Cont’d from Buzzer data setting screen page 33

Cont’d from Clear Timer data setting screen page 33

Cont’d from Clear Timer data setting screen page 33

VOLTAGE ADJ: +5

TO ACCEPT: SET

VOLTAGE ADJ: +4

TO ACCEPT: SET

VOLTAGE ADJ: -5

TO ACCEPT: SET

Loops through

eleven possibilities

CLEAR TIMER SET TO ACCEPT: SET

DEFAULT SETTINGS

TO ACCEPT: SET

Shift

Select

Shift

Select

Shift

Select

Shift

Select

Shift

Select

+

+

+

+

+

Set

 

 

 

VOLTAGE ADJ: +5

Monitor

TO CHANGE:SELECT

Set

 

 

 

 

VOLTAGE ADJ: +4

Monitor

TO CHANGE:SELECT

Set

 

 

 

 

VOLTAGE ADJ: -5

Monitor

TO CHANGE:SELECT

Returns to Data Setting screens

(with new value applied)

Set

 

 

 

CLEAR TIMER SET

Monitor

TO CHANGE:SELECT

Executes battery test and returns

to Data Setting screens

Set

 

 

 

DEFAULT SETTINGS

Monitor

TO CHANGE:SELECT

Executes battery test and returns

to Data Setting screens

This parameter allows the user to off- set the output voltage (while the unit is running on-lline) in 1% increments over a range of +/-5% total offset.

Default value is 0%

This parameter has no options to set. Pressing the SHIFT + SET button while this message is displayed will cancel timer settings.

This parameter has no options to set. Pressing the SHIFT + SET but- ton while this message is displayed will reset all variables to their default value.

38

1600EP Series Instruction Manual

Page 45 Page 47
Image 46
Page 45 Page 47
Contents 1600EP Series Page Product Use and Warranty Restrictions Qualified Personnel onlyUninterruptible Power System UPS Toshiba Customer Support Center PurposeToshiba Customer Support Center Toshiba International CorporationThis page intentionally left blank Table of Contents UPS Protection System Preventive Maintenance/Parts ReplacementDisplay Screens IndexSymbols General Safety InstructionsProhibited Symbol indicates do not take action Signal Words Important Safety Instructions Qualified personnel shallInstructions Importantes Concernant LA Sécurité To be performed by Qualified Personnel OnlyProduct Description Power BackupPower Conditioning Application and UseUnpacking Inspection/Storage/DisposalInspection StorageInstallation Precautions Conductor Routing and GroundingOperating Precautions Equipment Warning Labels 48518Page UPS Connections Wire Size and Tightening TorqueTerminal Block Remote Contacts Pin Signal Function Logic UPSCommunication Interfaces Voltage CurrentUPS Stop Signal Operation Applicable OS Windows NT, IBM OS/2 LAN server, LANtasticRS-232C Pin Symbol DescriptionRemotEye II Network Card UPS Specifications Standard Models 3.6kVA-RoHS 3.6kVA 6kVA 8kVAStandard Models 3.6kVA-RoHS 3.6kVA 6kVA 8kVA cont’d RS232 Ascii Interface StandardStandard Models 3.6kVA-RoHS 3.6kVA 6kVA 8kVA cont’d Capacity KVA 8.5 kW1 Standard Models 10kVA 14kVA 18kVA 22kVAKVA 15.3 kW1 KVA 18.7 kW1 Standard Models 10kVA 14kVA 18kVA 22kVA cont’d Capacity KVA 8.5 kW1 KVA 11.9 kW1 KVA 15.3 kW1 KVA 18.7 kW1Capacity KVA 8.5 kW1 KVA 11.9 kW1 KVA 15.3 kW1 KVA 18.7 kW Operating the UPS Battery Backup Time and Discharge ProcessBattery Low Voltage Tolerances 100% 20%Starting the UPS Stopping the UPSBattery Recharging Model Vmax Vmin IchargeOnline Mode Run operation Online ModeStatic-Bypass Mode Stop operation Battery Backup Mode On batteries EPO Emergency Power Off FunctionAudible Alarm Functions Condition Audible PatternFront Panel Layout Display and KeysLiquid Crystal Display LCD Functions Key Functional Description Operating KeysLight Emitting Diodes LED Behavior Significance/MeaningSystem Overview Screens Display ScreensScreen Arrangement UPS Start-Up Screens SequenceUps operation Load ###% Data Display Screens Special Display Screens StopData Setting Screens Data Setting Screens Cont’d Auto RUN YES To Change Select Auto RUN noAuto Retran YES To Accept SET Auto Retran no For Next Select Baud Rate To Accept SET To Begin SET Battery Test Inhibit System Warning Messages LCD Message LED Message Meaning/ActionSystem Fault Messages MeaningLCD Message Meaning/Action Status Change IndicationsAction UPS Protection System System Protection FeaturesSystem Protection Functions Overheat DC-OV DC-OC Preventive Maintenance Preventive Maintenance/Parts ReplacementParts Replacement Optional Receptacle Panel Installation Instructions Optional MB Maintenance Bypass Units UPS Unit and Shipping Weights External Layouts/Dimensions/Shipping WeightsDimensional Data Electrical Conduit Knock-out DataExternal Layout for 3.6 kVA-RoHS, 3.6 kVA, and 6 kVA units Air Index Page UPS Page Page Industrial Division

1600EP Series specifications

The Toshiba 1600EP Series is a notable entry in the landscape of multifunctional printers that has garnered attention for its robust performance and technological innovations. Targeted at small to medium-sized businesses, this series combines cost efficiency with high-quality output, making it an ideal choice for various office environments.

One of the standout features of the 1600EP Series is its impressive print speed. Capable of delivering up to 28 pages per minute, the printer significantly enhances productivity and meets the fast-paced demands of a modern office. Users can rely on quick first-page-out times, which is essential for handling numerous print jobs throughout the day.

In addition to speed, the Toshiba 1600EP Series emphasizes superior print quality. With a resolution of up to 1200 x 1200 dpi, it ensures that documents are sharp, clear, and professional-looking. Whether it’s text, graphics, or images, the printer excels in producing high-definition prints that can leave a lasting impression.

The 1600EP Series also integrates advanced digital technology, featuring a user-friendly touchscreen display that simplifies operation. This intuitive interface allows users to navigate through printing, copying, and scanning functions with ease. The series supports various paper sizes and types, enabling customization for different office needs.

Moreover, the Toshiba 1600EP Series is known for its sustainability features. It incorporates energy-saving modes and is designed for low power consumption, aligning with the growing emphasis on environmentally responsible practices in business operations. This eco-friendly approach is complemented by the use of long-lasting consumables, reducing the frequency of replacements and overall waste.

Networking capabilities are another highlight of the 1600EP Series. With built-in Wi-Fi and the option for mobile printing, users can connect seamlessly to various devices, enhancing accessibility and convenience. This flexibility ensures that employees can print from their smartphones, tablets, or laptops, streamlining workflow.

In summary, the Toshiba 1600EP Series stands out in the multifunction printer market, offering a blend of speed, quality, and innovative technology. Its user-centric design, coupled with sustainable features and strong connectivity options, makes it a reliable choice for businesses aiming to enhance their printing capabilities while maintaining efficiency and environmental responsibility. As organizations continue to seek reliable office solutions, the Toshiba 1600EP Series remains a compelling option worth considering.
Top Page Image Contents