Toshiba 1600EP Series manual UPS Connections, Terminal Block, Wire Size and Tightening Torque

Page 19

UPS Connections

Terminal Block

The following illustration is a detail view of the terminal block and wiring connections used for 208/240 volt units (see pages 49-50 for terminal block location).

Note 1 – If AC input power is 208 Vac rated, short terminals 11 and 12 with a jumper wire. DO NOT jumper terminal 13 to 12 or 11. Factory Setting is 208Vac. Use the jumper wire provided by Toshiba. DO NOT add any additional jumpers.

Note 2 – If AC input power is 240 Vac rated, short terminals 12 and 13 with a jumper wire. DO NOT jumper terminal 11 to 12 or

13.Use the jumper wire provided by Toshiba. DO NOT add any additional jumpers.

Wire Size and Tightening Torque

Use the following table to select the recommended wire size and terminal lug tightening torque for I/O wire connections.

 

Terminal

AWG

AWG

AWG

AWG

AWG

AWG

AWG

Tightening

Item

3.6RoHS

Torque

Number

3.6 kVA

6 kVA

8 kVA

10 kVA

14-18 kVA

22 kVA

 

kVA

lb.-in. (N•m)

 

 

 

 

 

 

 

 

 

AC Input Lines

1 and 2

12 (8)

12 (8)

10 (8)

8

(1/0)

6 (1/0)

4 (1/0)

1 (1/0)

14.2 (1.56)

AC Output Lines

4, 5, and 7

12 (8)

12 (8)

10 (8)

8

(1/0)

6 (1/0)

4 (1/0)

1 (1/0)

14.2 (1.56)

AC Output Neutral

6

12 (8)

12 (8)

10 (8)

8

(1/0)

6 (1/0)

4 (1/0)

1 (1/0)

14.2 (1.56)

Ground

3 and 8

12 (8)

12 (8)

10 (8)

8

(1/0)

6 (1/0)

4 (1/0)

1 (1/0)

14.2 (1.56)

EPO Switch

14 and 15

16

16

16

 

16

16

16

16

9.0 (0.99)

Remote Switch

16 and 17

16

16

16

 

16

16

16

16

9.0 (0.99)

Note: Wire size presented as the recommended size followed by a bold number in () that is the maximum wire size the terminal block can accommodate. See page 48 for knock-out hole sizes on the back of each model.

1600EP Series Instruction Manual

11

Image 19
Contents 1600EP Series Page Qualified Personnel only Product Use and Warranty RestrictionsUninterruptible Power System UPS Toshiba International Corporation PurposeToshiba Customer Support Center Toshiba Customer Support CenterThis page intentionally left blank Table of Contents Index Preventive Maintenance/Parts ReplacementDisplay Screens UPS Protection SystemSymbols General Safety InstructionsProhibited Symbol indicates do not take action Signal Words Qualified personnel shall Important Safety InstructionsTo be performed by Qualified Personnel Only Instructions Importantes Concernant LA SécuritéApplication and Use Power BackupPower Conditioning Product DescriptionStorage Inspection/Storage/DisposalInspection UnpackingConductor Routing and Grounding Installation PrecautionsOperating Precautions 48518 Equipment Warning LabelsPage UPS Connections Wire Size and Tightening TorqueTerminal Block Voltage Current Pin Signal Function Logic UPSCommunication Interfaces Remote ContactsApplicable OS Windows NT, IBM OS/2 LAN server, LANtastic UPS Stop Signal OperationRS-232C Pin Symbol DescriptionRemotEye II Network Card Standard Models 3.6kVA-RoHS 3.6kVA 6kVA 8kVA UPS SpecificationsRS232 Ascii Interface Standard Standard Models 3.6kVA-RoHS 3.6kVA 6kVA 8kVA cont’dStandard Models 3.6kVA-RoHS 3.6kVA 6kVA 8kVA cont’d Capacity KVA 8.5 kW1 Standard Models 10kVA 14kVA 18kVA 22kVAKVA 15.3 kW1 KVA 18.7 kW1 Capacity KVA 8.5 kW1 KVA 11.9 kW1 KVA 15.3 kW1 KVA 18.7 kW1 Standard Models 10kVA 14kVA 18kVA 22kVA cont’dCapacity KVA 8.5 kW1 KVA 11.9 kW1 KVA 15.3 kW1 KVA 18.7 kW 100% 20% Battery Backup Time and Discharge ProcessBattery Low Voltage Tolerances Operating the UPSStopping the UPS Starting the UPSModel Vmax Vmin Icharge Battery RechargingOnline Mode Run operation Online ModeStatic-Bypass Mode Stop operation EPO Emergency Power Off Function Battery Backup Mode On batteriesCondition Audible Pattern Audible Alarm FunctionsFront Panel Layout Display and KeysLiquid Crystal Display LCD Functions Behavior Significance/Meaning Operating KeysLight Emitting Diodes LED Key Functional DescriptionUPS Start-Up Screens Sequence Display ScreensScreen Arrangement System Overview ScreensUps operation Load ###% Data Display Screens Stop Special Display ScreensData Setting Screens Auto RUN YES To Change Select Auto RUN no Data Setting Screens Cont’dAuto Retran YES To Accept SET Auto Retran no For Next Select Baud Rate To Accept SET To Begin SET Battery Test Inhibit LCD Message LED Message Meaning/Action System Warning MessagesMeaning System Fault MessagesLCD Message Meaning/Action Status Change IndicationsAction UPS Protection System System Protection FeaturesSystem Protection Functions Overheat DC-OV DC-OC Preventive Maintenance Preventive Maintenance/Parts ReplacementParts Replacement Optional Receptacle Panel Installation Instructions Optional MB Maintenance Bypass Units UPS Electrical Conduit Knock-out Data External Layouts/Dimensions/Shipping WeightsDimensional Data Unit and Shipping WeightsExternal Layout for 3.6 kVA-RoHS, 3.6 kVA, and 6 kVA units Air Index Page UPS Page Page Industrial Division

1600EP Series specifications

The Toshiba 1600EP Series is a notable entry in the landscape of multifunctional printers that has garnered attention for its robust performance and technological innovations. Targeted at small to medium-sized businesses, this series combines cost efficiency with high-quality output, making it an ideal choice for various office environments.

One of the standout features of the 1600EP Series is its impressive print speed. Capable of delivering up to 28 pages per minute, the printer significantly enhances productivity and meets the fast-paced demands of a modern office. Users can rely on quick first-page-out times, which is essential for handling numerous print jobs throughout the day.

In addition to speed, the Toshiba 1600EP Series emphasizes superior print quality. With a resolution of up to 1200 x 1200 dpi, it ensures that documents are sharp, clear, and professional-looking. Whether it’s text, graphics, or images, the printer excels in producing high-definition prints that can leave a lasting impression.

The 1600EP Series also integrates advanced digital technology, featuring a user-friendly touchscreen display that simplifies operation. This intuitive interface allows users to navigate through printing, copying, and scanning functions with ease. The series supports various paper sizes and types, enabling customization for different office needs.

Moreover, the Toshiba 1600EP Series is known for its sustainability features. It incorporates energy-saving modes and is designed for low power consumption, aligning with the growing emphasis on environmentally responsible practices in business operations. This eco-friendly approach is complemented by the use of long-lasting consumables, reducing the frequency of replacements and overall waste.

Networking capabilities are another highlight of the 1600EP Series. With built-in Wi-Fi and the option for mobile printing, users can connect seamlessly to various devices, enhancing accessibility and convenience. This flexibility ensures that employees can print from their smartphones, tablets, or laptops, streamlining workflow.

In summary, the Toshiba 1600EP Series stands out in the multifunction printer market, offering a blend of speed, quality, and innovative technology. Its user-centric design, coupled with sustainable features and strong connectivity options, makes it a reliable choice for businesses aiming to enhance their printing capabilities while maintaining efficiency and environmental responsibility. As organizations continue to seek reliable office solutions, the Toshiba 1600EP Series remains a compelling option worth considering.