User Configuration Items
The user can configure the phone behaviour relating to a line and the corresponding overview accord- ing to his personal needs.
Line Configuration Menu
The menu can be accessed using the Web Based Management (WBM) or the local user menu at the phone. The location is:
User > Configuration > Keyset > Lines
WPI (see [4]) tags are available for these settings, too.
| User Line Key Configuration |
| The keyset line configuration can be |
| done separately for each individual |
| line. Each line has a tab of its own in |
| which the parameters are set. |
|
|
Parameter | Meaning |
Ring delay | Number of seconds until the phone will play the ringing tone for an incoming call. |
(seconds) |
|
Allow in | If checked, the line will be shown in the overview table. |
overview |
|
Address | AoR resp. call number for this line (not configurable by the user). |
Primary line | Line status (not configurable by the user). |
Ring on/off | If checked, a ringer tone is played for incoming calls on this line (not configurable |
| by the user). |
Selection order | Used for outgoing calls if idle lines are selected automatically (not configurable by |
| the user). |
Hot/warm line | Not used in this context. |
Hot/warm | Not used in this context. |
destination |
|
Multi Address Appearance on OpenStage | 00.00.2007 I 15 |