Administrative Options
The MAA (Multiple Address Appearance) is a subset of the SEN proprietary MLA (Multiple Line Appear- ance). Therefore, some administrative settings are used in both scenarios. The descriptions given here are limited to the settings needed for MAA. Any deviating usage of the parameters will enable MLA, which is only supported by the SEN OpenScape Voice platform.
There are two sets of options:
¾A general set of options affecting all types of configured line keys. These options are used when at least one FPK is configured as (primary) line key.
¾A set of options per line key. These options specify the behaviour of individual line keys. Thus, each line key can have different settings.
General Keyset Options
WBM Configuration:
Admin > System > Features -> Keyset operation
General Keyset Options
The options can be set via WBM,
WPI und local phone menu.
The following are common for all keyset lines. The Rollover ring setting will be used when a call is active and an incoming call arrives on a different line.
¾no ring: The phone will not ring on the incoming call.
¾"alert ring": A 3 seconds burst of the configured ring tone is activated on the incoming call.
¾"alert beep": A beep tone is played on the incoming call, instead of a ring tone. The tone is added to the audio of the call, so if a handset is used, the tone will sound from the handset.
¾"standard ring": The default ring tone is activated on the incoming call.
LED on registration determines whether the line LEDs will be lit for a few seconds if they have been registered successfully with the SIP server on phone startup.
Multi Address Appearance on OpenStage | 00.00.2007 I 17 |