Automation and Drives - SCE
The hardware configuration of the PLC is mapped in the 'SIMATIC 300 Station' and 'CPU' folders. This is done in the special case where a configuration is created with the CPU
Also, a clock memory is configured and the addresses of the input and output modules are set in this case.
The user must perform the following steps in order to set up a project and create the hardware configuration.
1.The central tool in STEP 7 is the 'SIMATIC Manager', which is started by
2.STEP 7 programs are managed in projects. Such a project will now be set up ( → File → New)
|
|
|
|
|
|
|
Foreword | Notes | Hardware configuration |
| STEP 7 program | Testing |
|
|
|
|
|
|
|
|
T I A Training Document |
| Page 12 of 25 |
| Module | ||
|
|
|
|
| A5 | |
Issue date: 02/2008 |
|
|
| Programming the CPU | ||