5. ADJUSTMENT
5. ADJUSTMENT
5.1 Tilt Angle Adjustment
Tilt angle and brightness of the operator’s display can be adjusted.
Adjustment method is common to both of
CAUTION!
1.Do not adjust the display angle by holding the LCD panel. Doing so may damage the unit. Be sure to hold the LCD frame.
2.Care must be taken not to catch your fingers between POS terminal and the LCD Frame when bending the display backward.
5.1Tilt Angle Adjustment
The tilt angle of the operator’s display can be adjusted freely in a range of 0° to 90°.
Hold both sides of the LCD frame, and slowly push the display backward to your best angle.
<Single display type (Standard)>
0° to 90°
LCD Frame 
<Dual display type (Option)>
0° to 90°
0° to 90°
5- 1