Toshiba ST-71 owner manual Options, Option name Model

10. SPECIFICATIONS

EO1-12031

10.2 Options

10.2 Options

Option name	Model				Description
			24V-drive standard drawer
			(with screw holes on the left and the rear for installing the
	DRWST-51A-4MVK-QM-R		POLST-51)
	DRWST-51A-8MVK-QM-R		Dimensions and Weight:
Drawer unit			460(W) x 400(D) x 115(H) mm, 10 Kg
			Money Case Type: MC4,8
		Type		Coin tray	Mini coin case		Remarks
			Bill holder			CDC
	Drawer type	4MVK-QM	5	5	No	Yes	With media slot
		8MVK-QM	4	6	1		With media slot
						Yes
	TFTST-71-2A-QM-R		12.1-inch TFT color display to be installed onto the POS
			terminal
2nd display unit
	TFTST-71-5A-QM-R		15.1-inch TFT color display to be installed onto the POS
			terminal
LVDS board	KIT-71-DSP1-QM-R		Used to connect a TFTST-71 optional 2nd display unit.
Line indicator unit	LIUST-71-BAAK-QM-R		20 characters x 2 lines dot display to be installed onto the
(LIU)			POS terminal
			Pole and extension cable for attaching an LIUST-71 optional
Pole unit	KIT-71-POLE-QM-R		line indicator unit at the level of 235 mm from the standard
			position
LIU stand	KIT-71-BASE-QM-R		A stand for installing an LIUST-71 optional line indicator unit
			onto the POS terminal
	TRST-56-P-1K-QM-R		Parallel interface single thermal printer for 80 mm wide paper
			Cabinet color: Cool Black
Printer unit
	TRST-56-S-1K-QM-R		Serial interface single thermal printer for 80 mm wide paper
			Cabinet color: Cool Black
			PC card/CF card interface kit
PCMCIA/CF			This kit conforms to the 32-bit CardBus (Card-32) card and
	MIFST-71-2-QM		the 16-bit PC card (Card-16).
interface board
			A slot is provided on the board, which supports up to
			PCMCIA Type II or CF card TYPE II.
COM5 and COM6	KIT-71-COM-QM-R		COM5 or COM6 connector and cable kit
connectors
Magnetic card	MCRST-71-3-QM-R		ISO Track 1 and 2 type magnetic card reader kit
reader (MCR)
iButton	KIT-71-BTN1-QM-R		iButton unit to be installed onto the POS terminal
			(An iButton key is not included.)
Relay PC board	KIT-71-RELY-QM-R		Used to control an optional MCR unit or iButton unit.

NOTE:

Model names that end with "-R" are RoHS compliant models. If "-R" is not attached, that model is non RoHS compliant.

Never install non RoHS compliant optional equipment or parts on a RoHS compliant machine which is supposed to be used in the countries that enforce the RoHS directive, as doing this is legally prohibited.

10- 3