Siemens manual Colour monitor 43B1-M

Page 15

Colour monitor 43B1-M

If you want to change other settings, select the corresponding function from the main menu. All possible adjustments of the monitor are described in the following.

Setting the contrast of the display (Contrast)

If the contrast is set too high, bright grey levels can no longer be distinguished from very bright grey levels. If the contrast is set too low, the maximum brightness will not be achieved.

Setting the brightness of the display (Brightness)

Setting the Black level

With the black level you adjust the brightness of the gray-scale values. Resetting the monitor to the factory settings adjusts the black level to the optimal value.

If the black level is set too high, black surfaces are no longer shown as deep black, but instead as gray (worse contrast). If the black value is too low, it is not possible to distinguish between dark shades.

Setting the focus (picture definition) (Focus)

Eliminate picture noise and improve focus.

Setting the clock (picture width) (Clock)

Eliminate vertical interference with local fuzziness (synchronisation with the graphic card signals).

There is only one proper setting per resolution and refresh rate for these parameters.

Adjusting the horizontal position (H. Position)

Shifting the picture to the left or to the right.

Adjusting the vertical position (V. Position)

Shifting the picture up or down.

Setting language for the OSD menu (Language)

You can choose from English (default setting), German, French, Spanish and Italian.

Setting the colour temperature

Setting colour tone of screen to 9300°K (bluish) or 7300°K (less bluish) or to a user- defined colour temperature.

Resetting the monitor to the factory settings (Reset)

Executing AUTO LEVEL function

AUTO LEVEL adjusts contrast (video gain) to optimal value and returns contrast numerical feedback value in the OSD to 50.

A26361-K883-Z100-1-5E19

English - 13

Image 15
Contents Contents Page Introduction Target groupFurther information Safety Important notesNotational conventions Cleaning TransportFCC Class B Compliance Statement Declaration of Conformity Disposal and recycling Power cableEnergy Star Guidelines CE markingChecking the contents of the consignment Connecting the monitor Installing an ergonomic video workstationColour monitor 43B1-M Operation of the monitor Tilting and turning areaAnti-theft protection Stage Energy-saving mode Switching the monitor on/offChanging the monitor settings Performing auto-adjustment of the monitorAdjusting the brightness Adjusting the contrast Monitor settings using the OSD menuColour monitor 43B1-M Locking the OSD menu OSD Lock Storable display modes Electrical data Technical dataDimensions and weight LCD monitor AccessoriesSupported modes VESA-DDC-compatible VGA interfacePin Meaning Trouble shootingNo display power indicator does not light Pin assignment D-SUBImage of last screen display still visible No display power indicator lightsPermanently unlit or lit pixels Screen becomes darker