Toshiba 386SX, AR-B1376, AR-B1375 manual SSD Utility

Page 35

AR-B1375/AR-B1376 User s Guide

5.2.2 SSD Utility

To support the AR-B1375/AR-B1376 solid-state disk’s operations, the following files have been provided on the enclosed diskette’s directory <SSD>.

(A) PGM137x.EXE

PGM137x.EXE PGM137x.EXE is used to program the 12V FLASH EPROM after the ROM pattern files are generated by RFG.EXE. The PGM137x.EXE can also program the correctness of the ROM pattern files onto 5V FLASH EPROM (start from MEM1) or SRAM for testing the ROM pattern files.

To execute PGM137x.EXE, the main menu will be displayed on your screen. There are 8 options on the main menu.

Quit to DOS

Quits and exits to the DOS.

OS Shell

Exits from PGM137x temporarily to the DOS prompt. Type EXIT to return to PGM137x main menu.

Load ROM File

If this option is used, the PGM137x will prompt you for the ROM pattern file name. This option is useful if you have not previously entered a ROM pattern file name or if you wish to use a different ROM pattern file. The PGM137x will check and display the ROM file name, ROM file size, (FLASH) memory capacity and the number of ROM pattern files that will be loaded and copied onto the (FLASH) memory chips.

Verify Memory

If ROM pattern files were loaded without error, this option instructs PGM137x to verify the contents of (FLASH) memory chips with the current ROM pattern files.

Program Memory

If there are no mistakes in your ROM pattern file, then this menu option will erase (FLASH) memory, write the current ROM pattern files onto (FLASH) memory and verify data that was just written to (FLASH) memory, using the ROM pattern files.

Memory Type/Mfr.

Before you program the (FLASH) memory chips, make sure that the FLASH’s type and manufactory match the one shown on the main menu. Otherwise, you can use this option to select the proper type and manufacture and instruct the program to use a right programming algorithm.

Select PGM Chips

Normally the PGM137x will program all ROM pattern files onto the FLASH memories with the ROM pattern files just loaded. But you can use this option to select which memory chips that you want to program and which memory chips need to be skipped. The PGM137x will only program the selected chips when writing data to the FLASH memory. This is very useful when some of the memory chip were verified and programmed previously.

Select FLASH PLSCNTs

If the 12V FLASHs have been programmed several times, please select the <Slowest> FLASH PLSCNT mode instead of <Standard> mode. In the <Slower> or <Slowest> mode, PGM137x.EXE will retry more times to program data onto the 12V FLASHs correctly. The default setting is <Slowest> mode.

(B) WD137x.EXE

 

WD137x.EXE

This program demonstrates how to enable and trigger the watchdog timer. It allows you to

 

test the <TIMES-OUT & RESET> function when the watchdog timer is enabled.

5-3

Page 34 Page 36
Image 35
Page 34 Page 36
Contents 386SX CPU Card Page Table of Contents Programming RS-485 & Index Bios ConsoleSpecifications & SSD Types Supported Using Memory Banks Placement & DimensionsPreface Organization Static Electricity PrecautionsPacking List OverviewIntroduction Features DMA Controller System ControllerMicroprocessor DMA ControllerInterrupt Controller Keyboard ControllerI/O Port Address Map 1 I/O Port Address Map2 I/O Channel Pin Assignment Bus Hex Range DeviceI/O Channel Pin Assignments Real-Time Clock & Non-Volatile RAM TimerREAL-TIME Clock and NON-VOLATILE RAM Address DescriptionTransmitter Holding Register THR Interrupt Enable Register IERSerial Port Receiver Buffer Register RBRModem Status Register MSR Line Control Register LCRModem Control Register MCR Line Status Register LSRPrinter Interface Logic Parallel PortDivisor Latch LS, MS Register AddressPrinter Control Latch & Printer Control Swapper Error Slct PE -ACK -BUSYPrinter Status Buffer Page Overview Setting UP the SystemAUX. Keyboard Connector J4 System SettingKeyboard Connector Pin Mini DIN Keyboard Connector CN3Pin PC/104 Connector Bus a & B CN2 2 PC/104 ConnectorPin PC/104 Connector Bus C & D CN1 Name Description O Channel Signal DescriptionHDD Pin Assignment Hard Disk IDE Connector CN4I/O Channel Signal’s Description Pin SignalCN6 FDD Port Connector CN5Parallel Port Connector CN6 External RS-485 Adapter Select J6 & J7 Serial PortRS-232/RS-485 Select for COM-B JP2 RS-485 Terminator JP7LED Header Reset Header J1RS-232 Connector CN7 & DB2 External Power LED Header J2External Speaker Header J5 Power Connector J3External Battery Battery Charger Select JP3SIMM1 SIMM2 Dram ConfigurationExternal Battery Connector J11 CPU Base Clock Select JP1IRQ 9 Used Select Connecting the CRT MonitorVGA Setting JP5 CRT/LCD Flat Panel DisplayLCD Flat Panel Display CRT Connector DB1Inverter Board Description LCD ConnectorDE/E Signal from M or LP Select JP6 JP6 LCD Control Connector CN9Manufacture Model No Description LCD Panel Display Connector CN8Supported LCD Panel LCD Display AssignmentUtility Diskette InstallationStep VGA DriverWIN 3.1 Driver WIN 95 DriverSSD Utility RFG.EXE RFGDEMO.PGF Write Protect FunctionSoftware Write Protect Enable the Software Write ProtectDisable the Software Write Protect Hardware Write ProtectLED Watchdog TimerWatchdog Timer Setting Time-Out SettingWatchdog Timer Disabled Watchdog Timer EnabledWatchdog Timer Trigger Solid State Disk Switch SettingDEVICE=C\DOS\EMM386.EXE X=C800-C9FF Overview2 I/O Port Address Select SW1-1 SSD Firmware Address Select SW1-2Flash Eprom Sram SSD Drive Number SW1-3 & SW1-4Simulate 2 Disk Drive Disk Drive Name Arrangement ROM Type Select SW1-5 & SW1-6M1~M3 & JP4 Memory Type Setting Jumper SettingUV Eprom 27Cxxx ROM Disk InstallationSwitch and Jumper Setting JP4 Large Page 5V Flash DiskSoftware Programming \PGM137X ROM pattern file name Small Page 5V Flash ROM Disk Using Tool ProgramRAM Disk Typing DOS Command\FORMAT RAM disk letter /U Combination of ROM and RAM DiskPage Bios Setup Overview Bios ConsoleHard Disk Setup Standard Cmos SetupDate & Time Setup Floppy SetupAdvanced Cmos Setup System Keyboard Password CheckWait for ‘F1’ If Error Hard Disk DelayAdvanced Chipset Setup Load Default Setting Password SettingSetting Password Password CheckingBios Update Auto Configuration with Fail Safe SettingBios Exit Save Settings and ExitFile of AMIFLASH.EXE had to Version SSD Types Supported Specifications & SSD Types SupportedSpecifications Fujitshu AtmelSST WinbondSocket Using Memory BanksRegister Port CS1 CS0Page Placement Placement & DimensionsDimensions Send out one character Transmit Programming RS-485 & IndexProgramming RS-485 Initialize COM portINPSTR$ Return OUT &H3FC, INP%H3FC and &HFA ReturnPrint #1, OUTCHR$ OUT &H3FC, INP&H3FC and &HEF ReturnName Function

386SX, AR-B1376, AR-B1375 specifications

The Toshiba AR-B1375 and AR-B1376 are notable embedded computing solutions that incorporate the 386SX microprocessor architecture. Designed for various applications, these models focus on reliability, performance, and versatility, making them appealing choices for system integrators and developers.

At the core of the AR-B1375 and AR-B1376 is the Intel 386SX microprocessor. This landmark processor marked a significant advancement in computing technology, introducing a 32-bit architecture while maintaining compatibility with 16-bit applications. The 386SX is known for its efficient processing capabilities, offering both multitasking support and enhanced memory management. It operates at clock speeds ranging typically from 16 MHz to 25 MHz, contributing to its effectiveness in running industrial applications.

One of the key features of the AR-B1375 and AR-B1376 systems is their modular architecture, which allows for easy customization and expansion. This modularity means users can tailor the hardware according to specific requirements, making it suitable for a wide range of applications such as automation, telecommunications, and embedded systems.

Both models support various I/O options, ensuring seamless integration with peripherals and external devices. They typically come equipped with serial and parallel ports, as well as support for modern interfaces like USB. The systems also feature onboard expansion slots, enabling the addition of further functionality, such as additional memory or specialized processing units.

In terms of memory, the AR-B1375 and AR-B1376 support a range of RAM configurations, allowing users to scale their systems based on the application demands. The inclusion of EPROM and EEPROM options also facilitates easy updates and programmability, which is crucial for embedded systems that often require firmware adjustments over time.

Moreover, these models are known for their robust thermal management features, which are essential in industrial environments where conditions can be harsh. This capability ensures stable performance and longevity, reducing the risk of system failures due to overheating or environmental factors.

To summarize, the Toshiba AR-B1375 and AR-B1376, coupled with the 386SX microprocessor, offer a blend of performance, flexibility, and reliability. Their modular design, extensive I/O support, and memory scalability make them ideal for a variety of embedded computing applications, placing them as commendable options in the world of industrial computing solutions. These systems not only exemplify Toshiba's commitment to innovation but also contribute significantly to the functionality of embedded technologies in a rapidly evolving industry.
Top Page Image Contents