Toshiba EM1-33046AE, B-442-QP Ribbon Loading Instructions, Placement of Ribbon Supply Roll

Page 23

8. RIBBON LOADING INSTRUCTIONS

EM1-33046A

8. RIBBON LOADING INSTRUCTIONS

8. RIBBON LOADING INSTRUCTIONS

1.Place an empty roll on the front ribbon rewind spindle.

2.Loosen the tape that secures the ribbon leader and fold it over the end of the leader. The tape will be used to affix the leader to the ribbon rewind roll.

3.Install the ribbon supply roll on the rear spindle so that the ribbon feeds from the top of the roll toward the rear. Position the ribbon roll at the center of the spindle. Guide the end of the leader through the ribbon feed slot.

4.Open the printer carriage by pulling up the release lever on the forward left side of the front rubber roller. Pull the leader forward and over the ribbon guide roller.

5.Using the tape at the end of the ribbon leader, affix the leader to the top of the rewind roll. Be careful to align the sides of the leader to the sides of the roll.

6.Wind the ribbon rewind roll until the ribbon leader has wound onto the roll and the black part of the ribbon is visible. Remove any excess slack.

CAUTION: Center both ribbon supply and rewind rolls on the spindles and parallel these ribbon rolls with each other. Failure to do this may cause ribbon wrinkle or void printing.

7. Return the printer carriage to the down position

CAUTION: Both sides of the printer carriage must be hooked completely, otherwise blurred print, media skew or ribbon wrinkle may be caused.

8.Close the top cover and press the Feed switch until the green On-line indicator light is illuminated. NOTE: Make sure that both sides of the top cover are completely hooked.

2

4

3

1

Fig. 8-1 Placement of Ribbon Supply Roll

1.

Printer Carriage Release Lever

3.

Ribbon Rewind Roll

2.

Ribbon Supply Roll

4.

Thermal Transfer Ribbon

8-1

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 442 EMC List of Standards of Conformity EU onlySafety Summary Request Regarding Maintenance PrecautionsTable of Contents Introduction FeaturesSafety Summary 4 2 Q Q Equipment ChecklistApplicable Model Unpacking and InspectionPrinter SpecificationsCommunications Interface Options525.0 mm~115.0 mm MediaRibbon Core Shape CARE/HANDLING of the Media and RibbonPrinter Parts OverviewInterior View External Label Roll Mount External Label Roll MountSwitches and Indicator Lights DIP Switch Functions RS-232C Serial Interface SET UP ProcedureSetting UP the Printer Requirements for OperationLoading Label and TAG Stock Inserting Label Supply Roll into Label Supply Roll Mounts SELF-PEELING Function Setting Up Printer for Self-Peeling FunctionRibbon Loading Instructions Placement of Ribbon Supply RollProper Placement of Label Stock and Thermal Transfer Ribbon Install External Label Roll Mount Install External Label Roll MountInstall Memory Module Option Install Memory ModuleSelf Test Dump Mode Cleaning General MaintenanceRemoving Jammed Media Density AdjustmentCovers and Panels Problem Solution Trouble ShootingError Messages Example HOW to Connect the Printer with Portable LCD Keyboard

B-442-QP, B-442, EM1-33046AE, EM1-33046A specifications

The Toshiba EM1-33046A and EM1-33046AE are advanced semiconductor devices primarily designed for high-performance applications. These models are part of Toshiba's broader portfolio, which emphasizes cutting-edge technology and reliability. The EM1-33046A offers impressive operational capabilities and is well-regarded for its low power consumption, making it ideal for energy-sensitive applications.

One of the distinguishing features of the EM1-33046A and its variant, the EM1-33046AE, is their robust operational range. They are engineered to handle varying voltage levels efficiently while maintaining performance stability. This adaptability is crucial in fields such as automotive electronics, industrial automation, and consumer electronics, where devices must operate under diverse conditions. Furthermore, these components are built with integrated protective mechanisms, enhancing their reliability and longevity.

Complementing these models are the B-442 and B-442-QP series. The B-442 is known for its exceptional power management capabilities. It features an advanced architecture that optimizes the distribution of power across multiple channels, ensuring that electronic systems run smoothly and efficiently. The B-442-QP variant, on the other hand, introduces enhanced performance metrics, offering quicker response times and improved thermal management. This makes it perfect for applications that require rapid processing and minimal heat generation.

Both the B-442 and B-442-QP benefit from Toshiba's innovative power semiconductor technology. They utilize cutting-edge fabrication techniques, resulting in high-efficiency performance while minimizing energy waste. The devices are also designed with advanced thermal characteristics, allowing them to operate at higher temperatures without compromising functionality.

In summary, the Toshiba EM1-33046A, EM1-33046AE, B-442, and B-442-QP series are engineered for high performance and efficiency. Their unique combination of features makes them suitable for various applications, including automotive, industrial, and consumer electronics. These models not only showcase Toshiba's commitment to innovation but also their dedication to providing reliable, energy-efficient solutions for modern electronic systems. The integration of these technologies positions Toshiba as a leader in the semiconductor industry, meeting the evolving demands of a wide range of applications.
Top Page Image Contents