Toshiba 351C, 451C, 281C manual Lcf All, Ppc Sys

Adjustment mode (05)

					Default			Pro-
	Classifi-			Func-	<Accept-
Code		Items				RAM	Contents	cedur
	cation			tion	able			e
					value>
494	Laser	Secondary	When	ALL	135	M	When the value	1
		scanning data	decelerat-		<0-255>		increases by “1”, the
		laser writing	ing to 1/2				image shifts by approx.
		start position					0.2 mm toward the
495			When	ALL	135	M		1
			decelerat-		<0-255>		trailing edge of the
			ing to 1/3				paper.
496			When	ALL	140	M		1
			decelerat-		<0-255>
			ing to 1/4
497-0	Laser	Adjustment of	Upper	ALL	128	M	When the value	4
		drawer side-	drawer		<0-255>		increases by “1”, the
497-1		ways devia-	Lower	ALL	128	M	image shifts toward the	4
		tion	drawer		<0-255>		front side by 0.0423
							mm.
497-2			PFP upper	ALL	128	M		4
			drawer		<0-255>
497-3			PFP lower	ALL	128	M		4
			drawer		<0-255>
497-4			LCF	ALL	128	M		4
					<0-255>
497-5			Bypass	ALL	128	M		4
			feeding		<0-255>
498-0	Laser	Adjustment of	Long size	ALL	131	M	When the value	4
		duplex feed-			<0-255>		increases by “1”, the
		ing sideways					image shifts toward the
498-1			Short size	ALL	131	M		4
		deviation	(A4/LT or		<0-255>		front side by 0.0423
			smaller)				mm.
499	Develop-	Black developer	unit lift up/	ALL	2	M	Change the lift up/down	1
	ment	down timing adjustment			<0-255>		timing of the black
							developer unit when a
							CEB0 error occurs.
							(Chap. 3.11.3)
501	Image	Density	Photo	PPC	128	SYS	When the value	1
		adjustment		(black)	<0-255>		increases, the image of
		Fine adjust-					the center step density
503			Text/Photo	PPC	128	SYS		1
		ment of “man-		(black)	<0-255>		becomes darker.
		ual density”
504			Text	PPC	128	SYS		1
		/Center value
				(black)	<0-255>
505	Image	Density	Text/Photo	PPC	20	SYS	Sets the changing	1
		adjustment		(black)	<0-255>		amount by 1 step at the
		Fine adjust-					density adjustment.
506			Photo	PPC	20	SYS		1
		ment of “man-		(black)	<0-255>		When the value
		ual density”					increases, the image of
507			Text	PPC	20	SYS		1
		/Light step		(black)	<0-255>		the “light” steps
		value					becomes lighter.
508	Image	Density	Text/Photo	PPC	20	SYS	Sets the changing	1
		adjustment		(black)	<0-255>		amount by 1 step at the
509		Fine adjust-	Photo	PPC	20	SYS	density adjustment.	1
		ment of “man-		(black)	<0-255>		When the value
		ual density”					increases, the image of
510			Text	PPC	20	SYS		1
		/Dark step		(black)	<0-255>		the “dark” steps
		value					becomes darker.

© June 2005 TOSHIBA TEC	e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
	2 - 59

2

06/10