Toshiba 351C, 451C, 281C manual Setting mode Default Pro Classifi Func Accept Code Items

Notes:

1.The digit after the hyphen in “Code” of the following table is a sub code.

2.In “RAM”, the NVRAM of the board in which the data of each code is stored is indicated. “M” stands for the LGC board, “SYS”, “NIC” and “UTY” stands for the SYS board.

Setting mode (08)

				Default					Pro-
	Classifi-		Func-	<Accept-
Code		Items			RAM		Contents		cedur
	cation		tion	able					e
				value>
200	General	Date and time setting	ALL	-	-	Year/month/date/day/			5
				<13 dig-		hour/minute/second
				its>		Example:
						03 07 0 13 13 27 48
						“Day” - “0” is for “Sun-
						day”. Proceeds Monday
						through Saturday from
						“1” to “6”.
201	General	Destination selection	ALL	EUR: 0	M	0: EUR			1
				UC: 1		1: UC
				JPN: 2		2: JPN
				<0-3>		3: Other
202	User	Counter installed externally	ALL	0	M	0:	No external counter		1
	interface			<0-4>		1:	Coin controller
						2: Copy key card
						3: Key copy counter
						4: Key card for OEM1
203	General	Line adjustment mode	ALL	0	M	0: For factory ship-			1
				<0-1>		1:	ment
							For line
						*	Field: “0” must be
							selected
204	User	Auto-clear timer setting	ALL	3	SYS	Timer to return the			1
	interface			<0-10>		equipment to the
						default settings when
						the [START] button is
						not pressed after the
						function and the mode
						are set
						0:	Not cleared
						1 to 10:
							Set number x 15
							sec.
205	User	Auto power save mode	ALL	11	SYS	Timer to automatically			1
	interface	timer setting		<0, 6-15>		switch to the energy
						saving mode when the
						equipment has not
						been used		6: 3min.
						0:	Invalid
						7:	4min.	8: 5min.
						9:	7min.
						10: 10min.
						11: 15min.
						12: 20min.
						13: 30min.
						14: 45min.
						15: 60min.

© June 2005 TOSHIBA TEC e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE

2

2 - 89