Toshiba 451C, 281C, 351C manual Ate level Color 225 Bias Trailing Edge 1842-3

Adjustment mode (05)

						Default			Pro-
	Classifi-				Func-	<Accept-
Code		Items					RAM	Contents	cedur
	cation				tion	able			e
						value>
1842-0	Transfer	Actual value		Intermedi-	ALL	153	M	Displays the value of	10
		display of 2nd		ate level	(black)	<0-225>		2nd transfer roller bias
		transfer roller		bias of				on the leading/trailing
		bias		trailing				edge of paper when
		of leading/		edge				printing is performed.
		trailing						(The value corrected in
1842-1				Bias of	ALL	157	M		10
		edge of paper		leading/	(black)	<0-225>		05-1839 is displayed.)
		(Tab paper)		trailing
				edge
1842-2				Intermedi-	ALL	150	M		10
				ate level	(color)	<0-225>
				bias of
				trailing
				edge
1842-3				Bias of	ALL	154	M		10
				leading/	(color)	<0-225>
				trailing
				edge
1845-0	Transfer	2nd transfer roller bias			ALL	153	M	Displays the value of	10
		actual value display			(black)	<0-187>		2nd transfer roller bias
		(Tab paper)						when printing is oper-
1845-1					ALL	150	M		10
					(color)	<0-187>		ated.
1847	Transfer	1st transfer roller bias			ALL	400	M	The drum surface	1
		actual value display				<300-		potential at the 1st
		(Tab paper)				800>		transfer bias resistance
								detection control is
								adjusted.
								[Unit: V]
1848	Transfer	1st transfer bias resis-			ALL	-	M	The result value of the	2
		tance detection control				<0-9999>		1st transfer bias resis-
		Result value display						tance detection control
								is displayed.
								[Unit: V]
1849	Transfer	1st transfer roller bias out-			ALL	154	M	When the value	1
		put adjustment			(black)	<0-225>		decreases, the 1st
								transfer roller bias out-
								put increases.
								This setting is enabled
								when "0" (disabled) is
								set at the codes 08-
								541, -549 and -551.
1850-0	Transfer	1st transfer		Y	ALL	138	M	When the value	4
		roller bias out-			(color)	<0-225>		decreases, the 1st
1850-1		put adjust-		M	ALL	143	M	transfer roller bias out-	4
		ment			(color)	<0-225>		put increases.
								This setting is enabled
1850-2				C	ALL	154	M		4
								when "0" (disabled) is
					(color)	<0-225>
								set at the codes 08-
1850-3				K	ALL	154	M		4
								541, -549 and -551.
					(color)	<0-225>
1861	Transfer	1st transfer roller	bias RMS		ALL	154	M	The RMS value of the	2
		value display			(black)	<0-225>		1st transfer roller bias
								at the time of printing is
								displayed.

e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE © June 2005 TOSHIBA TEC

2 - 84