Toshiba 3510C manual Turning power off Shutdown

Turning power off (Shutdown)

When turning OFF the power of the equipment, be sure to shut it down following the procedure below. Check the following three points before shutdown.

y No jobs should be left in the print job list. ( P.266 “Job Status”)

yNone of the PRINT DATA, MEMORY RX and FAX communication lamps should be blinking. (If the equipment is shut down while any of the above lamps is blinking, jobs in progress such as FAX reception will be aborted.)

yNo PC should access the equipment via the network.

yDo not press the power switch to turn the power OFF, otherwise the stored data may be lost or the hard disk may be damaged.

yWhen the equipment is shut down, the job in progress is cleared.

1Press the [ENERGY SAVER/ SHUTDOWN] button on the control panel.

2 Press the [SHUTDOWN] button on the touch panel.

To cancel the shutdown operation, press the [CANCEL] button.

Preparation 1- Turning Power On/Off 47