Siemens S50037 manual Pin Description, Pinout Diagram, Pin description table, Power

SieMo S50037 Data Book PRELIMINARILY

Pin Description

Pinout Diagram

figure 10 SieMo Pinout, bottom view

Pin description table

Row X,D,E and F are by default not provided with soldering bumps

Pin Name

Type

Pin Description

RF

ANT	Rf in/out	T2	Antenna output, 50Ω; unconditionally
			stable; DC path to GND
TX-EN	CMOS output,	F57	Control output for external switch or PA
	pulled down
RX-EN	CMOS output	F47	Control output for external switch or LNA
	pulled down
TX-PWR	Analogue output	F67	Ramping control output for external PA,
			need not be used, ramping is done on the
			module.
Power
VCC	Power	C6	Power Supply 3.25-6V
VCC-IO	Power	C4	Power Supply for all IO-Pins, 3.0-3.4V, can
			be connected to VREG
UART-Interface
TxD	CMOS output, 5V	B5	UART data output
	tolerant, pulled down
RxD	CMOS input, 5V	A5	UART data input
	tolerant, pulled down
RTS	CMOS input	A6	UART Ready To Send
CTS	CMOS output	B6	UART Clear To Send
N.C.
not connected	not connected	X1-X6,F2,F3		Do not connect. Will be
				used in future versions.
not connected	not connected	C2,C3,C5, R4-6,T4-T6		Do not connect.

7No Bump

13/30