Siemens S50037 manual Module

Page 2

SieMo S50037 Data Book PRELIMINARILY

SieMo S50037

-Module

KEY Features

￿Bluetooth V1.1 prequalified

￿Input sensitivity –85 dBm

￿Point-to-multipoint functionality

￿Firmware below HCI embedded, or stand alone operation

￿Class 2 Bluetooth device, 2 dBm

￿HCI optionally via high-speed UART, BCSP and USB

￿Interface data rate UART to 1.5 MBPS, USB high speed 1.1 (12 MBPS)

￿Frequency range 2.402 – 2.480 GHz

￿Temperature range 0-40° centigrade (qualified)

￿Mechanical outline 32.8 x 16.8 x 3 mm³ (34 x 18 x 3 mm³ for sample quantities)

￿Power supply 3.25V-6V, Max. 120 mA

￿GFSK modulation, frequency hopping, 79 channels spaced by 1 MHz

￿Internal Crystal oscillator

￿50 Ohm Antenna connector

￿SMD mountable

Description:

The SieMo S50037 is a Class2 Bluetooth Module which can be integrated into various electronic devices to give them Bluetooth functionality.

The connections to the environment consist of a single positive power supply, a 50 Ohm Antenna connector, UART, SPI, BCSP USB and PCM Interface, 6 PIO lines, control signals for an external Power Amplifier and one Pin which allows to switch between two different firmware versions.

SieMo is shipped as an HCI Module, which means that the lower Bluetooth stack up to HCI is included in the Firmware and it can be changed into a stand-alone Module with the complete BT- stack and some simple applications running on the module via a firmware upgrade.

The module supports synchronous voice transmission as well as asynchronous data transfer.

File Name: SieMo_S50037 Data Book.doc

Page 2/30

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Data Book Module Author Part of this Document Department PSE PRO RCDHistory Issue Date Reason for ChangesGeneral Information ReferencesGeneral Information Electrical CharacteristicsContent Pin DescriptionBluetooth-Trademark Manufacturing aspects, Handling Regulatory StatementsPower Supply ResetTerminal Characteristics Electrical CharacteristicsTiming Characteristics Absolute Maximum RatingsMode Min Typ Max Unit Power ConsumptionRadio Characteristics Receiver Min Typ Max Unit SpecTransmitter Min Typ Max Unit Spec Output SpectrumModulation Spectrum Spurious emissions on the antenna port Flatness of output power Vs timeOutput spectrum in the whole 2,4 GHz ISM band Max Hold VCO Settling Parameter of the Antenna portPin Description Pinout DiagramPower Pin description tableSPI-Interface USB-InterfacePCM-Interface PIO-Interface15/30 Overview Interface DescriptionPCM Interface DescriptionPCM Timing Timing graphs PCM clock upper Vs PCM sync in 2 different time-scalesUart Interface Uart SettingsProperty Possible Values Default Setting RTS/CTS20/30 USB Interface Disconnect and Resume SignallingPower Modes UsbresumeInstruction Cycle USB TimingSerial Peripheral Interface Single-Cycle OperationWriting to SieMo Terminal Type Description Device PC Parallel ConnectorMulti-Slave Operation SPI TimingReading from SieMo Auto-Increment OperationManufacturing aspects, Handling European Union EU and Efta Member States Regulatory StatementsGeneral EN 301 489-17 ETS 300 826 V1.1.1United States of America USA FCC ID P6L-SieMo-S50037Manufacturer information concerning antenna Bluetooth-Trademark Appendix a List of figures
Top Page Image Contents