Dell T1650 Numlock LED, Is enabled by default, Keyboard Errors, Post Hotkeys, VT for Direct I/O

Page 39

Option	Description

	• Disabled - Does not allow the system to power on by special LAN signals
	when it receives a wake-up signal from the LAN or wireless LAN.
	• LAN Only - Allows the system to be powered on by special LAN signals.
	This option is Disabled by default.
Block Sleep	This option lets you block entering to sleep (S3 state) in operating system
	environment.
	• Block Sleep (S3 state) - This option is disabled by default.
Table 7. POST Behavior

Option	Description

Numlock LED	Specifies if the NumLock function can be enabled when the system boots. This option
	is enabled by default.
Keyboard Errors	Specifies whether keyboard related errors are reported when it boots. This option is
	enabled by default.
POST Hotkeys	Specifies whether the sign-on screen displays a message, that displays the keystroke
	sequence required to enter the BIOS Boot Option Menu.
	• Enable F12 Boot Option menu - This option is enabled by default.
Table 8. Virtualization Support

Option	Description

Virtualization	This option specifies whether a Virtual Machine Monitor (VMM) can utilize the
	additional hardware capabilities provided by Intel Virtualization technology.
	• Enable Intel Virtualization Technology - This option is enabled by default.
VT for Direct I/O	Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional
	hardware capabilities provided by Intel® Virtualization technology for direct I/O.
	• Enable Intel Virtualization Technology for Direct I/O - This option is enabled
	by default.
Trusted Execution	This option specifies whether a Measured Virtual Machine Monitor (MVMM) can
	utilize the additional hardware capabilities provided by Intel Trusted Execution
	technology. The TPM virtualization technology, and Virtualization technology for
	direct I/O must be enabled to use this feature.
	• Trusted Execution - This option is disabled by default.
Table 9. Maintenance

Option	Description

Service Tag	Displays the service tag of your computer.
Asset Tag	Allows you to create a system asset tag if an asset tag is not already set. This option
	is not set by default.

39

Image 39

Contents Regulatory Model D09M Regulatory Type D09M004 Dell Inc Contents Technical Specifications Contacting Dell System SetupDiagnostics Troubleshooting Your ComputerBefore Working Inside Your Computer Working on Your ComputerAfter Working Inside Your Computer Turning Off Your ComputerRemoving the Cover Removing and Installing ComponentsInstalling the Cover Recommended ToolsInstalling the Intrusion Switch Removing the Intrusion SwitchRemoving the Front Panel Install the coverRemoving the Expansion Card Installing the Front PanelRemoving the Memory Installing the Expansion CardInstalling the Memory Memory Module GuidelinesRemoving the Coin-Cell Battery Installing the Coin-Cell BatteryRemoving the Hard Drive Removing the Optical Drive Installing the Hard DrivePage Removing the Speakers Installing the Optical DriveRemoving the Power Supply Installing the SpeakersPage Page Removing the Heat Sink Installing the Power SupplyInstalling the Heat Sink Installing the Processor Removing the ProcessorRemoving the System Fan Removing the Thermal Sensor Installing the System FanPage Removing the Power Switch Installing the Front Thermal SensorRelease the power-switch cable from the chassis clips Page Removing the Input/Output I/O Panel Installing the Power SwitchPage Removing the System Board Installing the Input/Output I/O PanelPage Installing the System Board System Board Components PCI Card connectorNavigation Keys System SetupBoot Sequence Following table displays the system setup navigation keysOption Description System Setup OptionsOptionDescription Default Setting All drives are enabled Enter the old password Admin Password Security features Drive does not have a password set by defaultComputrace Service from Absolute Software Power Off default Disabled by defaultAC Recovery Loss. You can set the AC Recovery toBy default Is enabled by defaultKeyboard Errors Sequence required to enter the Bios Boot Option MenuDefault Updating the BiosJumper Settings Jumper Setting DescriptionSetup password System and Setup PasswordPassword Type Description Password that you must enter to log on to your systemDisabling a System Password Enhanced Pre-Boot System Assessment ePSA Diagnostics DiagnosticsPage Power LED Diagnostics Troubleshooting Your ComputerBeep Code Error MessagesController may be faulty Take the appropriate action to resolve the problemPlease run Setup program Configuration Populate DIMM1 Seated or installed Keyboard failureReset failed Disk re-set operation failed Sector not found Error Message Description Not a boot diskettePlug and play configuration error Read faultFeature Specification Technical SpecificationsFeature SpecificationSystem Chipset Intel C216 chipset DMA Channels Integrated Two channel high definition audioIntegrated CommunicationFour PCI 2.3 data width maximum 32 bits One 120-pin connectorOne 36-pin connector One 164-pin connectorNetwork and the computer Front of the computer Power button lightDrive Back of the computerConnected during this test Lights up. If the LED does not light up, the powerSupply may be defective. AC power must be Electrical outletFeature Specification Contacting Dell