Dell T5600 owner manual Installing the Optical Drive, Removing the Thermal Sensor

Installing the Optical Drive

1.Lift the release latch, and slide the optical-drive cage inside the compartment.

2.Press on the clasp to release the latch and thread the cables into the holder.

3.Connect the power cable to the back of the optical drive.

4.Connect the data cable to the back of the optical drive.

5.Install the cover.

6.Follow the procedures in After Working Inside Your Computer.

Removing the Thermal Sensor

NOTE: The thermal sensor is an optional component and your computer may not ship with it.

1.Follow the procedures in Before Working On Your Computer.

2.Remove the cover.

3.Identify the thermal sensor connected to the system board.

4.Disconnect the thermal sensor from the system board.

5.Release the latch that secures the thermal sensor. In this instance, the thermal sensor is connected to the hard drive.

12