Small Form Factor Computer
NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components.
1Follow the procedures in "Before You Begin" on page 20.
2If you have installed a padlock through the padlock ring on the back panel, remove the padlock.
3Slide the cover release latch back as you lift the cover.
4Grip the sides of the computer cover and pivot the cover up using the bottom hinge tabs as leverage points.
5Remove the cover from the hinge tabs and set it aside on a clean,
1
4 | 2 |
3
1security cable slot
2cover release latch
3padlock ring
4computer cover
24
Quick Reference Guide